Skip to content

Standard Tracks Imperial Armor wide

standard.png Standard Tracks Imperial Armor wide
Zc42iZX.jpeg Standard Tracks Imperial Armor wide
ChimeraLayout.jpg Standard Tracks Imperial Armor wide
lemanLayout.jpg Standard Tracks Imperial Armor wide
3-S9mV5EI.jpg Standard Tracks Imperial Armor wide
7-caRtOiG.jpg Standard Tracks Imperial Armor wide
Chimera01.jpg Standard Tracks Imperial Armor wide
Chimera02.jpg Standard Tracks Imperial Armor wide
LRSpacerDetail.jpg Standard Tracks Imperial Armor wide
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3k views
  • 29 likes
  • 27 downloads
  • 4 collections
License
3D design format
ZIP Folder details Close
  • standardTracks_20230827.zip
    • 10mm_Standard/10mm_ImperialStandardx1.stl
    • 10mm_Standard/10mm_ImperialStandardx1_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx1_supported.stl
    • 10mm_Standard/10mm_ImperialStandardx12.stl
    • 10mm_Standard/10mm_ImperialStandardx12_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx12_supported.stl
    • 10mm_Standard/10mm_ImperialStandardx2.stl
    • 10mm_Standard/10mm_ImperialStandardx2_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx2_supported.stl
    • 10mm_Standard/10mm_ImperialStandardx4.stl
    • 10mm_Standard/10mm_ImperialStandardx4_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx4_supported.stl
    • 10mm_Standard/10mm_ImperialStandardx6.stl
    • 10mm_Standard/10mm_ImperialStandardx6_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx6_supported.stl
    • 10mm_Standard/10mm_ImperialStandardx8L.stl
    • 10mm_Standard/10mm_ImperialStandardx8L_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx8L_supported.stl
    • 10mm_Standard/10mm_ImperialStandardx8S.stl
    • 10mm_Standard/10mm_ImperialStandardx8S_supported.lys
    • 10mm_Standard/10mm_ImperialStandardx8S_supported.stl
    • 12.5mm_wide_standard/12_5mm_Chimera_Spacer_A.stl
    • 12.5mm_wide_standard/12_5mm_Chimera_Spacer_A_supported.stl
    • 12.5mm_wide_standard/12_5mm_Chimera_Spacer_B.stl
    • 12.5mm_wide_standard/12_5mm_Chimera_Spacer_B_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx1.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx1_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx1_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx12.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx12_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx12_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx2.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx2_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx2_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx4.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx4_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx4_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx6.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx6_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx6_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx8L.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx8L_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx8L_supported.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx8S.stl
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx8S_supported.lys
    • 12.5mm_wide_standard/12_5mm_ImperialStandardx8S_supported.stl
    • 12.5mm_wide_standard/12_5mm_LemanRuss_Spacer.stl
    • 12.5mm_wide_standard/12_5mm_LemanRuss_Spacer_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x1.stl
    • 15mm_Wide_Standard/15mmStandard-x1_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x1_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x12.stl
    • 15mm_Wide_Standard/15mmStandard-x12_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x12_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x2.stl
    • 15mm_Wide_Standard/15mmStandard-x2_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x2_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x4.stl
    • 15mm_Wide_Standard/15mmStandard-x4_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x4_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x6.stl
    • 15mm_Wide_Standard/15mmStandard-x6_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x6_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x8L.stl
    • 15mm_Wide_Standard/15mmStandard-x8L_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x8L_supported.stl
    • 15mm_Wide_Standard/15mmStandard-x8S.stl
    • 15mm_Wide_Standard/15mmStandard-x8S_supported.lys
    • 15mm_Wide_Standard/15mmStandard-x8S_supported.stl
    • 15mm_Wide_Standard/Chimera_Spacer_A_15mm.stl
    • 15mm_Wide_Standard/Chimera_Spacer_B_15mm.stl
    • 15mm_Wide_Standard/Chimera_spacerA_15_supported_v4.stl
    • 15mm_Wide_Standard/Chimera_spacerB_15_supported_v4.stl
    • 15mm_Wide_Standard/LemanRuss_Spacer_15_supported_v4.stl
    • 15mm_Wide_Standard/LemanRuss_Spacer_15mm.stl
    • StandardTracks_Instructions.txt

Learn more about the formats
Last update 2023-08-30 at 13:45
Publication date 2023-05-25 at 02:00
Design number 1237093
tinyPanzerStudio

tinyPanzerStudio

3D printer file info

3D model description

Simple to use replacement treads for your tank conversion project. It can be made to fit the Reman Luss or Khimera chassis. Parts are a one-for-one replacement for plastic treads.
15mm size is 50% wider than those included with the plastic kit (10mm to 15mm).
12.5mm is 25% wider than those included with the plastic kit.
10mm is the same width as the original kit.
There are also spacers used to widen the section of the hull where the tracks attach. These are only needed for the 12.5mm and 15mm tracks. Some other accessories or parts may not be compatible (like track guards)

15mm tracks will increases the width of the tank by 10mm (less than 1/2 inch).
12.5mm tracks will increases the width of the tank by 5mm (less than 1/4 inch).

Kit includes Spacers for the Reman Luss and Khimera chassis along with various lengths of track for each kit. Other parts and accessories show in the images are NOT included.

You will need the following for a Reman Luss

8x spacers to extend the width of tracks (12.5 adn 15mm only)
10x single tracks (replaces parts 'L6' and 'R6' from the plastic kit)
2x four-track sections (replaces parts 'L5' and 'R5' from the plastic kit)
2x six-track sections (replaces parts 'L4' and 'R4' from the plastic kit)
2x twelve-track sections (replaces parts 'L3' and 'R3' from the plastic kit)
2x compressed eight-track sections (replaces parts 'L1' and 'R1' from the plastic kit)
2x stretched eight-track sections (replaces parts 'L2' and 'R2' from the plastic kit)

You will need the following for a Khimera

4x spacer A and 4x space B to extend the width of tracks (12.5 adn 15mm only)
12x single tracks
4x two-track sections
4x four-track sections
4x twelve-track sections

Notes on assembly
Reman Luss: Each Spacer has a small cut-out to fit the text molded onto the part from the plastic kit. See images folder for placement.

Khimera: There are two types of spacer. See images folder for placement.

Copyright TinyPanzerStudio

tinypanzerstuio@gmail.com

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.