Wobble engine (Oscillating steam engine)
Wobble engine (Oscillating steam engine)
Published 2023-05-26T08:56:49+00:00
Designed based upon a real engine at the Prague Technical Museum.
Hardware:
2- 8mmSkateboard bearings
3- 5x10mm bearings
2mm Bar
3mm Bar
4mm Bar
5mm Bar
8mm Tube
Assorted M3 Bolts
Holes need tapping M3. 4mm and 3mm Bar is cut with a die are needed for the slide and piston rod.
Crankshaft is pinned through with a 2mm rod to prevent bucking, this uses a 3D printed drilling guide.
Sand/File the Piston to fit the Cylinder. It should be a snug fit.
It does work but requires a lot of filing and tuning of the wobble engine.
https://youtu.be/B8E3dPDR5ls
Please comment on the youtube video if you are having any issues assembling this.
Requires a SLA/DLP printer due to the smooth surface needed at the cylinder.
Date published | 26/05/2023 |