BMW Steering Wheel Multimedia Roller Button (v1.0)

Printable Multimedia Roller Button for BMW F-Models

Upgrade your BMW F-model's multimedia experience with this printable roller button designed for your steering wheel. This roller, controlled with your right hand, allows you to navigate through your multimedia menus effortlessly.

Why Upgrade:
The OEM rollers often suffer from a common issue – over time, the rubber coating softens, becomes sticky, and eventually falls apart. Instead of replacing it with another OEM part, why not seize this opportunity to customize your steering wheel with a solution that costs less and offers endless personalization options?

Features:
- Cost-effective alternative to ordering a new OEM wheel roller button.
- Unlimited printing for personal use.
- Compatibility with models featuring a standard steering wheel (not suitable for M-Sport wheels).

Future Updates:
This design will be continuously updated and expanded with custom rollers for more customization options. Keep an eye out for updates, including an M-sport version button, which will be added to this bundle in the future.

Refund Offer:
Be among the first three people to post a make of this roller button installed in your car, and you'll receive a full refund!

Compatibility:
This roller button is designed to fit most BMW F-models, including but not limited to:
- F01, F01 LCI
- F02 LCI
- F03, F03 LCI
- F04 Hybrid
- F06 Gran Coupé, F06 Gran Coupé LCI
- F07 GT, F07 GT LCI
- F10, F10 LCI
- F11, F11 LCI
- F12, F12 LCI
- F13, F13 LCI
- F20, F20 LCI
- F21, F21 LCI
- F22
- F23, F23 LCI
- F30, F30 LCI
- F31, F31 LCI
- F32, F32 LCI
- F34 GT, F34 GT LCI
- F36 Gran Coupé, F36 Gran Coupé LCI

Enhance your driving experience and add a personalized touch to your BMW – download the printable multimedia roller button today!

Printing Recommendations:

If you reside in a colder climate, PLA is suitable for printing this file. However, if you're in a warmer climate where car temperatures may exceed the glass transition temperature (VICAT) of PLA, consider switching to PETG or even ASA for better durability.

Layer Heights:
For optimal results, use layer heights ranging from 10 microns to 20 microns. If you're using CURA, disable retraction and enable combing to minimize the z-seam. Additionally, utilize SMART HIDING and select "Shortest" as the Z-seam setting.

Infill Settings:
Set infill to 100% or adjust wall thickness to approximately 3mm.

Print Speed:
Don't hesitate to print at a slower speed, as the file is relatively small. Even with a layer height of 0.10 micron and a print speed of 25mm/s, the print should take around 20 minutes.

With these printing guidelines, you'll achieve the best results for your project.