Superman cell phone or tablet holder

Superman cell phone or tablet holder, the logo is included so you can place it wherever you want, nothing else sticks or if you want to screw it.

Dimensions: 6.5 cm wide x 12 cm high x 12.5 cm deep

It remains to sand and paint as soon as I finish painting it, I will upload the photo

If you want to place it vertically, it is your decision, since lying down it has more resistance to impact or pulls and vertically, the superman face will turn out well and you will not sand much anymore

Superman cell phone holder or tablet holder, the logo is included so you can place it wherever you want, just stick it on or screw it on if you want.

Dimensions: 6.5 cm wide x 12 cm high x 12.5 cm deep

Remains to be sanded and painted as soon as I finish painting it I upload the photo.

If you want to place it vertically is your decision, since lying down has more resistance to impact or pulls and vertically you will get well the face of superman and you will not sand much

Parameters

layer height: 0.2mm

initial layer : 0.32 mm

Walls: 5

top and bottom : 5

40% infill so that it has a good resistance

filled pattern: zigzag

Speed: 45mm/s

support: tree, important since that depends on how it will come out

Place the piece on the flat side of the cell phone holder, seen from the front, the superman place the left part on the printer bed.

Parameters

layer height: 0.2mm

initial layer : 0.32 mm

Walls: 5

top and bottom : 5

40% filler for good strength

filling pattern: zigzag

Speed: 45 mm/s

support: tree, important because it depends on how it will come out.

Place the part on the flat side of the cell holder, seen from the front the superman place the left side on the printer bed.