Lamborghini Logo LED

Hello friend, today on my profile, I wanted to bring the fantastic logo of lamborghini, as always, to save you the filament, the inside of the logo is empty, so you can also insert the LEDs to illuminate it.

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

Layer 0.10 or 0.15
Temp 205° / 50° PLA - 230° / 65° PETG
Infill 10%
Top and Bottom Layer 5
Perimeter Layer 3
Speed 50/60 mm/s