COOKIE CUTTERS X18 DESIGNS

This is a set of 18 cookie cutter designs, in which you can use them in any occasion, you can have a fun time with your friends, family, and even surprise your partner with the creation of beautiful and edible cookies and to have a nice time, there are endless possibilities that you can create

The dimensions of each design do not exceed 60 x 60 mm.

but can be adjusted up to a maximum of 80 mm.

Printing parameters can vary between different 3D printer models and also depend on the type of material or filament being used. Below, I will provide you with an overview of some common parameters that might vary:

Extrusion temperature: the temperature at which the filament is heated so that it can be melted and deposited in layers. Each type of material has an optimum extrusion temperature, which is usually stated on the filament packaging or in the manufacturer's documentation. Different printer models may have varying temperature ranges and it is important to set this correctly to ensure good print quality.





Print Speed: The speed at which the print nozzle moves during printing. It can be adjusted to control how quickly the material is deposited. The optimum print speed may vary depending on the material, object geometry and desired accuracy. Some printers allow you to adjust the print speed on different parts of the object to obtain a balance between speed and quality.





Layer height: The height of each layer that is deposited during printing. It specifies the thickness of each individual layer in the printed object. A lower layer height generally results in better print quality, but also increases printing time. The recommended layer height may vary depending on the filament used and the desired resolution.





Shrinkage: Retraction is the process in which the filament retracts inside the extruder to avoid drips or "stringing" when the nozzle moves between different parts of the object. Retraction parameters include retraction distance (how much the filament retracts) and retraction speed (the speed at which retraction takes place). These values may vary depending on the filament type and printer configuration.





Adhesion to the print bed: To ensure good adhesion of the object to the printing surface, it is necessary to adjust parameters such as the temperature of the print bed, the type of printing surface (such as tape, glass, etc.) and the use of additional adhesives such as lacquer or Kapton tape. These parameters may vary depending on the type of material used and the characteristics of the printing surface.

It is important to note that these are only some of the common printing parameters and that there may be other parameters specific to each printer model. In addition, experience and experimentation also play an important role in optimizing the print parameters to your needs and preferences.