GuzzleGrip Turbo Beer Party Fun

GuzzleGrip Turbo Beer

Are you ready to take your beer drinking game to the next level? Then get our GuzzleGrip for beer bottles now and experience the ultimate beer drinking experience like never before!

Whether you're at a party or just relaxing at home, our GuzzleGrip will get that beer into your body in record time. With its clever venting system, it works much like a beer bong - only faster and more effectively. Within 3-5 seconds, you'll have emptied your bottle and can sit back and enjoy!

Installs in seconds, simply place on the neck of the bottle and lock into place. Thanks to the thoughtful venting, your beer comes through the mouth opening at high pressure and the bottle teaches in just moments. The Beer GuzzleGrip is the new star at any party and is guaranteed to create a buzz!

So what are you waiting for? Get our GuzzleGrip for beer bottles now and experience the fastest and coolest beer drinking game ever!

The GuzzleGrip is designed to seal on the neck of the beer bottle without the need for an additional gasket. As shown in the video, the GuzzleGrip is applied at an angle and then moved into position with minimal force.

Otherwise, all you need is a piece of standard silicone hose with an outer diameter of 8 mm , which you can buy at any hardware store.

Suitable for beginners! Will be printed as 1 part ready!

If the GuzzleGrip is either too tight or too loose due to your printer, simply scale the whole part by 1-2 percent so that it is tight and snug against the bottle! Print the whole part standing up. It is designed to require almost no supports and they can be removed quickly. After printing, move the hinge once with gentle force to allow the supports to come off. It can be printed with PLA or other materials!