"Juicy" - a 3" light-weight freestyle frame for DJI O3

Heya,

i had loads of fun with my build using the GEP-PTHD Frame and a naked Caddx Vista. I wanted to build a quad with the same flight behavior using an O3.

So i made a frame design that takes elements from the GepRC frame and combined it with my own ideas. I figured it would make sense to go 3" for more thrust.

NOTE: This frame needs to be cnc machined - it won't be stiff enough 3d-printed. I do have other frame designs that you can build yourself at home without a cnc though, check my other designs.

My build:

• eyefly "Juicy" frame
• EMAX Eco 1404 6000kv
• JHEMCU GHF420 AIO
• JHEMCU beeper
• DJI O3 (decased, only the outer case)

I'm flying it using 3s850mAh batteries - it's crazy powerful yet efficient, i'm getting around 5-8 minutes of flight time. I know it's common to go "as many cells" as possible. But try this setup - you'll be susprised. Also batteries are cheaper and it is way more silent than your typical 4-6s 3" screamer.

I added the spacers i used to mount the O3 to the top plate as well. You'll need metal spacers to connect the top plate to the bottom plate - height is up to you, i used 22mm spacers. You'll need at least 3 of these - however i suggest using at least 2 more to use before and after the FC to make sure that in case of a crash the O3 won't be pushed onto the FC and cause damage.

Apart from this, you just need M2 screws.

If you have questions about this frame or plan to build your own, feel free to join my Discord - i'll gladly help you out and would love to see my frames in action :-)

https://discord.gg/ZBEmBTNHAc