Articulated Elder Ankylosaurus

Why pay for this single file when you have it + over 500 more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!

Click here to join STLFLIX

Articulated Elder Ankylosaurus

This STL file is recommended for FDM Printers!
3D Printing Time: 21 Hours 51 Minutes
Approximately length: 22,5 cm
Remember to REMOVE SUPPORTS under the legs

These Ankylosauruses were designed with a new innovative articulation inspired by the real dinosaurs. They’re also print-in-place, so there’s no need for supports. As an advanced model, these will demand some printing skill from you. Just slow down on the first layer, and you’ll be good to go.

If you’re still nervous about printing it, try the baby version first!

COPYRIGHT & SELLING RIGHTS

This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.

To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.

Go commercial and skyrocket your own store with STLFLIX!

GO COMMERCIAL!

USEFUL LINKS

Get to know us a little better!

Website | Instagram | TikTok | Twitter

What are you waiting for? Join thousands of other makers from all around the world.

HAPPY PRINTING!

Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 15 mm/s (First Layer) / 45 mm/s (All the other layers)
Recommended Initial Layer Height: 0.20 mm
Recommended Layer Height: 0.20 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: None.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.