BABY YODA

The amazing thing about this model is that it bears a strong resemblance to the character from THE MANDALORIAN the challenge was in trying to preserve every feature of BABY YODA but that's just the starting point! the BABY YODA crib has a locking system this model was designed so that each of its pieces can be printed separately, also this model went through several iterations to make sure it was strong and easy to print and that it did not need many supports since the pieces that require the most support are the head.

This model is also optimized for AMS, which means that if you are using a Bambu or prusa with multiple colors, you should easily be able to use the fill tool for coloring.

Feel free to share images of your prints on this page I would love to see them, plus your comments are a great help to improve on my next models.

If you liked this model I invite you to follow me and look at my designs.

https://cults3d.com/es/usuarios/JECT/creaci%C3%B3n

head and hands

The head and hands require good support at 40 degrees and a moderate speed to generate a good finish on the part.

ship

in the vessel we recommend a wall line count of 3 and a support with a 60 degree angle (parts called tonillos a moderate speed is recommended due to their size).

body

the body is either complete which needs supports or divided in two which does not need supports

ship base

the base does not need supports, 100% filling is recommended.