1/24 scale model car wheel V14

This inculdes 3 different rim diameters (19", 20" and 21" (20.2mm, 21.2mm and 22.2mm at 1/24 scale)), and each in 2 different widths (approx. 9.5" and 11.3" (10mm and 12mm at 1/24 scale)).

Each wheel is made up of 3 parts. One part for the rim it self, the tire and the bolts. These parts have been made separate, to make it easier to paint.

These wheels fit perfectly on Tamiya plastic model cars in 1/24, and it has been tested on several models, the VW 1300 Beetle (24136) and the Mercedes-Benz 300SL (24338).
And they fit perfectly together with the set of brakes discs link I have made, originally also for my 1/24 model 300SL.

Please note that this model is NOT scaleable. The center axel might not work as intended if the model is scaled.

If you need some other sizes feel free to message me, and I will see what I can do.

Feel free to go and check out my profile for more printable stuff for your model cars and scale dioramas.

Please help me out. If you print out this model, don't hesitate to post a make of it. Would love to see what you use this model for. And if you like this design, then you are more than welcome to help me out by donating, by pressing the Donate button my profile page right here link.

These models are NOT for comercial use. If you have any inquiries, then please take it with the designer of these models.

Recommended printing on a resin printer, at layer eights around 0.02-0.01mm for det best results.
These have been test printed at 0.02mm and on a 4K and 6K resin printer, with great success.