Clef sound reactive RGB lamp

See it in action: https://www.youtube.com/watch?v=MjolrDta3FQ

I designed this clef lamp that would react to music and sound, perfect for visualizing your phone music or put it near a bluetooth speaker.
Material used: PLA
The base is small and you can print it on any printer
The Clef is big and can only be printed on a 300x300 base.
The clef lid is a solid piece and should be printed with 3-4 layers at the base, 2 layers outer shell and no top layers, 0% infill.

You will also need 1 meter of RGB LED strip, a music LED controller, which you need to take out of the box and insert into the black BASE of the lamp, also you need a 12v Power supply for 1-2 amps to power the thing.

Also you need 2 screws for the base, and 2 screws with bolt to screw the backside of the clef to the black base.

The modeule's antenna fits in the space where the front square hole is at the base, and the sound module fits in the 2 holders on the right, the black outlet has to fit into the square hole when you close the lid.

You print the black base with supports where the horizontal grid is, and they are easily removed.

Power supply:
https://shorturl.at/stZ79

remote controlled sound module like this:
https://shorturl.at/mqGM5

Or you can buy all in one kit (+ RGB led strip)
https://shorturl.at/bjC23

Please contact me for any inquiries or questions.

Black and white PLA
0.2 layer height for the base, and 0.3 layer height for the clef.
Printed face down.