Mushroom Power Up - Super Mario

Mushroom Power Up Super Mario Bros

With this STL, you can print the mushroom in any color you like.
For example: Red for super mushroom, green for 1-up, gold for coin mushroom and blue for mini mushroom.

All parts are to be printed separately in the correct corresponding colors to eliminate the need to paint.

Easy to assemble:
The mushroom and head arrows should be pointing towards each other. The same must be done for the eyes.

Glue the sparkles to the eyes and the eyes to the head piece (it is not necessary to glue the mushroom to the head)

Attention
The version of the head to serve as a container for objects is only available in Rock, Proppeler and Spring versions.

Update 06/30
If you want to print the mini mushroom use the maximum 70% scale of the files. - in this case, for the eye sparkles, use a scrap piece of white filament to press into the black eye pieces with as a small amount of glue. Trim the excess filament off with your cutters. (last image in gallery)

Update 07/03
I removed a small skew on top of the mushroom that added a strange layer to the print. (Mushroom.V2.stl)
-The problem didn't disturb the look of the piece because it was hidden, but now it's better :)

Don't forget to tag us in your posts as @rico3dmaker (instagram) showing your best printing!

Infill
Head - 20%
Mushroom and eyes - 10%

Resolution: 0.16mm

Supports: Mushroom (optional - for best results)

Scale: 100% - (It is important to ensure the fit of all parts)