Skip to content

Liquid soap/hand sanitizer dispenser for single hand/forearm use.

90085844_211047486634488_3888945027983867904_n.jpg Liquid soap/hand sanitizer dispenser for single hand/forearm use.
pump_gif.gif Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Handle.png Liquid soap/hand sanitizer dispenser for single hand/forearm use.
FOR_MODIFYING_-_Soap_Pump_Body_NO_HOLE.png Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Handle_Long.png Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Body_27mm_bottle_neck_diameter_30mm_cap_diameter.png Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Hinge_Pin_V2.png Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Body_27mm_bottle_neck_diameter_30mm_cap_diameter.stl Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Handle.stl Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Handle_Long.stl Liquid soap/hand sanitizer dispenser for single hand/forearm use.
FOR_MODIFYING_-_Soap_Pump_Body_NO_HOLE.stl Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Soap_Pump_Hinge_Pin_V2.stl Liquid soap/hand sanitizer dispenser for single hand/forearm use.
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.1k views
  • 3 likes
  • 41 downloads
License
3D design format
Folder details Close
  • FOR_MODIFYING_-_Soap_Pump_Body_NO_HOLE.stl
  • Soap_Pump_Body_27mm_bottle_neck_diameter_30mm_cap_diameter.stl
  • Soap_Pump_Handle.stl
  • Soap_Pump_Handle_Long.stl
  • Soap_Pump_Hinge_Pin_V2.stl

Learn more about the formats
Publication date 2023-06-15 at 12:14
?
Published to Thingiverse on: 2020-03-15 at 16:44
Design number 1272953
hairyfacedhooman

hairyfacedhooman

3D printer file info

3D model description

[8/6/20 V2 hinge pin uploaded - now contoured and sized to sit flush against the main body for a much nicer look.

I did design a variant that had a much less bulky body, but it ended up using practically the same amount of filament due to the amount of support material needed].

A simple application of a lever to make pushing the pump easier.

Perfect to folk with weaker wrists, arthritis, larger tools etc.

Functioning base designed for a bottle with a 27mm diameter neck, and a 30mm diameter lid. You may need to shave the inner ring a little to adjust to fit perfectly (it's a tight fit!)

Works best if the bottle has quite a wide base to prevent it from toppling. Results may vary with different bottle shapes/sizes!

The design should scale up without an issue but may need a little rework if scaling down, due to clearance tolerances being designed for this sized print.

Included is also a base without a hole in the bottom. Will accommodate any diameter lid up to 30mm - all you need to do is add a hole in the centre of the recess to accommodate the diameter of bottleneck you need.

PLEASE POST YOUR MAKES/REMIXES!

Please respect the CC licence and share with the same settings - assistive aids should be free and open-source!

Prints without supports, however, you may want to enable supports just to help out the curve around the hinge area get started.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.