Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, consider support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts
Description
The main display is based on NFS Underground 2 Career mode garage. Since the original in game garage is fairly plain, I've added more banner/posters to make it looks more lived-in.
Check out the turntable in motion: https://youtu.be/3LxZpsh7-ns
There is also a new variant exclusively for Cults!
Check out the upgraded edition in motion: https://youtu.be/pS4D5wViUWM
This variant is an upgrade to the orginal design by extending the turntable to have a small single car garage with working mechanism to push the car to the turntable fo display!
The display base is separated into multiple parts for easy printing and colour swap. All files are packed into a zip files and arranged in folder as follow:
1) Turntable, below are the details the folder and in each subfolders:
- TopCover3 - Floor.STL
1a) Base:
- Back.STL
- Front.STL
- Side.STL
- BackV2 - Short Bolts Compatible.STL
- FrontV2 - Short Bolts Compatible.STL
1b) Turntable:
- BaseClip.STL
- GearsHolderV2.STL
- MotorBase.STL
- MotorClip.STL
- MotorLockV2.STL
- Pin.STL
- spur_involute.STL
- SpurClip2.STL
- TurTableKey.STL
- TurTablePlate.STL
- TurTableTop - UDG2.STL
- worm_involute.STL
- WormBearingCap1Side.STL
- WormBearingCapOtherSide.STL
2) Garage Parts:
- Ceiling - LED Variant.STL
- Main Wall.STL
- Roof - LED Variant.STL
- Roof - No LED Variant.STL
- RoofCover - LED Variant.STL
- WallLeft.STL
- WallRight.STL
3) Interior Prop (Optional):
- FakeDoorV2.STL
- GarageBox3.STL
- OilBarrel.STL
- Posters - A4 Size.PDF
- Posters - A6 Size.PDF
- RimRack.STL
- Shelf.STL
- ShelfTopRack.STL
- TyreRack.STL
4) Covers (Optional):
- BaseFront Cover.STL
- BaseSide Cover.STL
- GarageFrontCover.STL
Cults Exclusive Parts
5) Upgrades
5a) Base:
- BackV3 - Additional Holes for upgrades.STL
5b) Extension Garage:
5c) Extension Base:
- Floor.STL
- RightWall.STL
- MirrorRightWall.STL
5d) Extension Walls:
- Connector Side Wall.STL
- Connector Side Wall - Right.STL
- Connector Back Wall.STL
5e) Car Pusher:
- CarPusherV7 - P4.STL
- CarPusherV8 - P1.STL
- CarPusherV8 - P2.STL
- CarPusherV8 - P3.STL
5f) Roof & LED Holder:
- Back - Connector Roof.STL
- LED Holder Lock.STL
- LED Holder.STL
5g) Garage Parts:
- DoorFrame.STL
- FakeDoorV2 - for PatchCabinet.STL
- Main Wall - Garage Door.STL
- New Shelf.STL
- PatchCabinet.STL
5h) Garage Door:
- GarageDoor.STL
- Guide - V3 - Extended.STL
5i) Turntable:
- TurnTableTop.STL
Additional Parts To Build The Turntable
- DC motor with angled output, commonly for robotics I think, picture: https://www.amazon.in/Robocraze-Single-shaft-BO-Motor/dp/B07DZZZDG5
- 10 number of M2.5x8 screws (Mostly for securing the base)
- 2 number of M2.5x6 screws (To secure the motor holder to the base)
- 8 number of M2.5x8 screws (It is for securing the gears and motor clips)
- Pulse Wave Module for controlling the motor speed.
- A 10cm long LED Dorm Light to dismantle and re-wired as power source for the motor: https://imgur.com/a/y3V403X
Additional Parts for Cults Exclusive Upgrades
- 4 number of M2.5x6 screws (To secure extensions to the original turntable base)
Print Settings
Nozzle size = 0.5 mm (0.4 will be printable and smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BackWall.STL":
1) Start (Door frame colour, mine is in grey)
2) Layer 5 (Overall wall colour, mine is in white)
3) Layer 61 (Shelf pattern, mine is in black)
Filament change layer for colours on "LeftWall.STL" & "RightWall.STL":
1) Start (Overall wall colour, mine is in white)
2) Layer 9 (Lower half colour, mine is in green)
Filament change layer for colours on "TopCover3 - Floor.STL":
1) Start (Gap lines colour, mine is in black)
2) Layer 6 (Overall floor colour, mine is in grey)
Filament change layer for colours on "Ceiling.STL":
1) Start (Gap lines colour, mine is in black)
2) Layer 11 (Overall ceiling colour, mine is in brown)
Assembly 1 (No Upgrades)
The car is just placed on top of the turntable.
Check out my assembly video to give you a better idea on how the build suppose to go: https://youtu.be/YtJmHuSwCP8
*Files used in these steps are found in "Turntable" folder. *
Step 1: Base Build
Print the following base and flat base:
- Back.STL
- Front.STL
- Side.STL (x2 required)
Alternate version for easy bolt locking:
- BackV2 - Short Bolts Compatible.STL
- FrontV2 - Short Bolts Compatible.STL
Additional parts:
- 8x M2.5x8 bolts will be required to secure the base.
The back piece is interchangeable with the front if you prefer to have a window at the back too.
Step 2: Turntable Build
Print the following to build the turntable:
Additional parts:
- 2x M2.5x6 bolts
- 2x M2.5x8 bolts
- 8x M2.5x8 screws
- DC motor with angled output, commonly for robotics I think, picture: https://i.imgur.com/XwKjYD5.jpg
- Pulse Wave Module for controlling the motor speed.
First print "MotorBase.STL", this is where the turntable and motors will be secured on it. Print "MotorLockV2.STL" and "GearsHolderV2.STL" next, these are motor holders and turntable gears holder.
Secure the motor holder on to the motor base byt bolting it. Gears holder will need to slide into the gap provided then bolt on to it with "BaseClip.STL".
The gears will fit nicely on the gears holder and slide the motor into the worm gear hole provided then slide the motor into the motor lock.
Lastly, secure the gears using the "WormBearingCap1Side.STL" and "WormBearingCapOtherSide.STL" on the worm gear. Secure "SpurClip2.STL" on the spur gear then lock "MotorClip.STL" to the motor holder.
When everything is secured, put the assembly into the base. It is recommended to glue/tape the motor base to the base built previously.
Step 3: Turntable Top Build
Print the following to complete the turntable:
- TurTableKey.STL (x2 required)
- TurTablePlate.STL
- TurTableTop - UDG2.STL
- Pin.STL
- TopCover3 - Floor.STL
Slide the turntable plate, "TurTablePlate.STL" on to the spur gear then push the pin to secure the position of the turntable plate to the spur gear.
Next, place "TopCover3 - Floor.STL" on the base then slide "TurTableTop - UDG2.STL" in the hexagon holes provided on the "TurTablePlate.STL". Now slide in "TurTableKey.STL" under "TopCover3 - Floor.STL" to lock "TurTableTop - UDG2.STL" to "TurTablePlate.STL".
Step 4: Garage Build
Files are found in "GarageParts" folder
Print the following parts to assemble the garage:
- Main Wall.STL
- WallLeft.STL
- WallRight.STL
Print the following parts to assemble the roof:
There are 2 variants of roof available, No LED variant and LED variant, for LED variant print the following parts:
- Ceiling - LED Variant.STL
- Roof - LED Variant.STL
- RoofCover - LED Variant.STL
For no LED variant print the following parts:
- Roof - No LED Variant.STL
Print the 3 walls listed above then place the main wall at the back of the turntable. Slide both the side walls into the slit provided on the main wall piece. After that, fit the roof on to the walls. If you printed the LED variant, slide the ceiling on to the roof piece then close it with the roof cover.
Step 4: Interior Props & Cover (Optional)
All the interior props are optional, they are made to fill the room with more items and make it feel more lived-in.
There is 2 PDF files that includes all the banner/poster I use for this build, there are more posters in it than I used in my build. The 2 sizes are scaled for different paper size.
The covers are meant to close the hole around the base from gathering dust. Mine has an additional PVC sheet tape on them.
Assembly 2 (Cults Exclusive Upgrades)
Check out my assembly video to give you a better idea on how the build suppose to go: https://youtu.be/G7ZeRlLZzVY
Files used in these steps are found in "Upgrades" folder.
Step 1: Swap Out The Turntable Top
Swap out the original turntable top with the new lowered edition. The lower edition allow the car to easily roll on to the turntable.
You can either dismantle most of the walls to remove or try squeeze your fingers to remove the locks.
Step 2: Swap Out The Main Wall
Swap the new main wall found in "Garage Parts" folder. Print the following files:
- Main Wall - Garage Door.STL
- PatchCabinet.STL
- DoorFrame.STL
- FakeDoorV2 - for PatchCabinet.STL
The new shelf found in the folder is optional print.
Step 3: Base Extension Build
Print the file in "Base" folder, this is the new back base for the turntable, includes 4 additional holes to secure the extention.
After that, print the files found in "ExtensionBase" folder.
- Floor.STL
- MirrorRightWall.STL
- RightWall.STL
The 3 files in it are the floor of the extended garage and the legs connecting to the original base. You will need 4 M2.5 bolts to secure it to the turntable.
Step 4: Garage Door
Print the following files:
- Guide - V3 - Extended.STL
- GarageDoor.STL
The guides will need to be printed twice and it will be slot on to the extenstion floors. The garage door will be bent and fit into the guide rail.
Step 5: Extension Garage Walls
Print all files found in "ExtensionWalls"
- Connector Back Wall.STL
- Connector Side Wall - Right.STL
- Connector Side Wall.STL
All 3 walls will slide into the gap provided on the floor file but hold the back wall for now.
Step 6: Build the Car Pusher
Print all files in the folder "CarPusher"
- CarPusherV7 - P4.STL
- CarPusherV8 - P1.STL
- CarPusherV8 - P2.STL
- CarPusherV8 - P3.STL
Please watch the assembly video linked above to see how to build this piece: https://youtu.be/G7ZeRlLZzVY?t=254
After building the car pusher, slide the back wall into the floor.
Step 6: Roof and LED Holder
Print all files in "Roof&LEDHolder"
- Back - Connector Roof.STL
- LED Holder Lock.STL
- LED Holder.STL
The LED holder will be slotted through the hole provided by the side wall and the lock will be slotted through the hole at the other side of the wall to secure it.
The roof will just slide on to the walls.
Please check out my assembly video to further understand how this is built: https://www.youtube.com/watch?v=G7ZeRlLZzVY
For a simplified edition with just the turntable, check it out at Printables: https://www.printables.com/model/469862-need-for-speed-underground-2-garage-turntable
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Custom display base designs are available from $5! Contact me to discuss what you want!
