Horizontal phone stand

I needed a horizontal mount sound enhancing phone stand that i could use for videos and movies but could only find vertical stands.

So I designed and printed several models with different types of sound enhancement approaches. This design is by far the loudest and cleanest sounding, greatly boosting the speaker's limited volume output .

This model is for Android phones with maximum dimensions of 164mm length by 10.9mm thickness (at camera side).

I'm willing to upload a modified version if your phone requires different dimensions for a better fit. Just message me your phone's make and model.

(Make sure your phone has the volume buttons on right side of the screen.)

The phone should be orientated with the volume buttons in the top position so the phone's speaker is located to the right.

Note: I use a printer with a max print area of 220mm by 220mm and had to print the body on an angle (corner to corner) because the model is 227mm in length.

Print nozzle--- 0.4mm
Print quality--- 0.2mm
Print speed--- 80mm/s
Print time (body) --- 6_hours 35_minutes.
Print time (panel)--- 12_minutes
Print time (both triangle stands)--- 1_hour 52_minutes
Infill density--- 13 percent
Infill pattern--- Gyroid
Supports---- not needed
Requires adhesive to secure the top panel to the body.
Super glue worked well for me.
Please feel free to ask me any questions before and/or after downloading.
Thank you.