MINI 3D PRINTER COLLECTION - Ender 3 V2

Hi guys,

Do you miss your 3D printer during the day?
Would you like to have a miniature of your 3D printer to show your colleagues and friends?

If yes, then you entered the right place.

This is the sixth model of our Mini Printer's collection.
We have several different models to share with you guys and we will share them all one-by-one each week.

Here, you can find the Ender 3 V2 model.
There are several parts that can move such as:
Drawer
Display
Display Knob
Leveling Knobs
X, Y and Z axis
Extruder Knob
Filament spool

NOTE: This model is not a scale version and the parts are not exactly like the original. The idea is to have a miniature look-a-like model of the real one which can be easily printable and can allow parts do move/turn like the X, Y and Z axis, display knob, leveling knobs and such.

All the parts are already at the correct printing orientation.
The parts can be printed with a 0.4mm nozzle, 0.12 or 0.16mm layer height and with PLA filament.

Some parts might require supports depending on your printer hability to handle overhangs.

The PTFE tube was made using flexible filament.

You will also need the following screws:

x4 M2x8 for the leveling knobs
x2 M2x6 for the heatbed
x2 M2x8 for the spool holder
x1 M2x8 for the extruder knob
x1 M2x6 for the X axis belt tensioner
x2 M2x5 for the X axiis carriage
x1 M2x5 for the nozzle
x1 M2x12 for the Z axis stepper motor
x4 M3x12 for the vertical profiles
x1 M3x12 + x1 M2x8 for the Y axis
x4 M2x8 for the frontal enclosure
x2 M2x8 for the back enclosure
x2 M2x6 for the display mount
x2 M2x5 for the display
x1 M2x6 for the display knob