Sugar Glider and Chinchilla 3d Printable Exercise wheel - STL and Gcode files only. Front back & Foot

Sugar Glider 3d Printable Exercise wheel - STL files only. Front back & Foot.
Designed at 280mm but on the slicer can easily be sized bigger or smaller to fit your own idea.
Use either gutter mesh from your local store or normal mesh of your choice to cable tie the front and back together evenly.
Note that the design allow the cable tie to cut portion to be hidden on the inside of the wheel so that your Glider or Chinchilla will not get hurt.
The design also has no middle portion for tails to get caught in.
Accessories needed:
3 Parts to be printed - This is included
2 x bearings for the foot portion - size of the bearing dependant on what size you print the foot - Not included.
1 x M10 70mm Bolt to connect back to foot with M10 nut, then slip through the bearings not included
1 x Lock nut with washer to secure the back and foot - not included
1 x Cage attachments - your choice of M6 Bolts, nuts and washers - not included.

Note this is a download file only and no physical product will be posted or sent in the mail.
Either print it on your own 3d printer - exact volume is 300mm x 300mm platform, or size it accordingly on the slicer.
Included - STL files of the front, back and foot and G-code files
Please adjust your 3d printer settings according to your own preference.

Enjoy and let me know if you need guidance. Happy Crafting

Printer settings are dependant on your printer and the type of filament you will be using and the speed thereof.