Modular Twin Traxxas TRX-4 Jerry Holders (Ford Bronco bodyshell)

This is a modified version of the original, offering two brackets joined at the centre for better strength.

These are modelled off the real-world counterpart.

They are designed to hold the separately-available Traxxas Fuel Canisters (part no. 8022) as seen in the photos.

To fit the Jerry cans, an M3 bolt of at least 10mm length is required. The printed hole is self-tapping.

The 3D model is printed whole, with no additional printed parts required to be attached.

Tip: use double-sized tape cut to size to mount the holders to the vehicle body.

Product License: CULTS - Private Use

You are authorized to:

Print and use the 3D prints of the 3D model for private use, in unlimited quantity;
    Share the images of your 3D prints of the 3D model on communication media such as social networks or websites.

What is not allowed:

No commercial use or public sharing of the 3D model;
No modification or adaptation of the 3D model for public sharing or sale;
No distribution, sale, donation or exchange of the digital files of the 3D model.

Can be printed in PETG or PLA+.

The photo shows PETG with a 0.4mm nozzle and a 0.12mm print quality setting, fitted to a Ford Bronco bodyshell.

A smaller nozzle will yield a smoother surface.

100% infill highly recommended.

Use support whilst printing.

Some minor post-processing of the part may be required, using a hobby knife or similar.