Pikachu keychain - KeyChain - Pokemon

Pikachu Key Chain - Pokemon

Decorative keychain

Very easy printing

Can be printed with filament change or each stl individually.

Easily customizable.

If you want to customize it, you must generate the text you want to print on the back side.

Use Std. parameters to get good results.

To print the legend on the back side you will have to make a design of the text, which does not exceed the dimensions of the key ring base.

The designed text should have a strict height of 0.24

Once this design is done:

1 - Print Text that will remain on the back with an initial layer height of 0.12 and layer height of 0.12.

It is very important to respect the text height, 0.24 and the layer height of the text print 0.12, otherwise when printing the base, it will cause problems on the printed text.

  A - If you laminate with Prusa Slicer


         Use Reflect function (Along X-axis)


      - If you use Cura


         Use the Mirror function (With respect to the X-axis)

2 - Print the base of the key ring (02 - Base Yellow.stl) defining the initial layer height at 0.36 and the layer height 0.2

3 - Print the rest of the keychain parts.

IMPORTANT: If you do not know how to print the megillas and eyes, see the file Pikachu Keychain.3mf.

We are @Piky3d

Initial layer height: 0.36

Layer height: 0.20

Line width: 0.44

Speed: 35 mm/s or higher