"Pulsar Proliferator" aka EMP Shotgun

Version 2.0 (Designed circa 2012)

"The Pulsar Proliferator fires a burst of 'mini-pulses' at every trigger pull, and each pulse disintegrates on impact to discharge a potent energy packet on the target. Unfortunately, field tests have not proven promising as the pulses dissipate over a short distance, which basically allows longer ranged opponents to dominate the battle field. In closer ranged combat however, the total pulsatory impact is devastating."

The Proliferator is based on the appearance of the EMP Shotgun in the War for Cybertron video game, and previously made available on Shapeways (Model ID: 5PUKSL2BJ). An assembly of 2 pieces, you can position the handle at the rear of main chassis or under it, for it to be held underslung or overhand. There is a 3mm clip rail behind the pump handle for additional accessories.
The Profilerator is 7.0 cm in length.

To keep up with the times, a variant is included with a 3mm diameter peg on the barrel tip for use with blast effect parts.

This model is for personal use only. Kindly avoid modifying, disseminating or selling it without my express permission.

You can find me on:

• Facebook (facebook.com/ArielLemon/)
• Twitter (twitter.com/fakebusker83)

You can also support me on Patreon!

• (patreon.com/fakebusker83)

This model have been successfully printed in SLS nylon, and have not been tested on FDM or SLA printers. However, printing it oriented vertically using FDM, with brim and support structures, should work.