Alcancia of Piccolo Dragon Ball Z

Add a touch of style with this Piccolo Daimaku stenciled piggy bank from the famous Dragon Ball Z anime.

In the .Zip file you can find the three parts that make up the body of the piggy bank (body, lid and cap) which is divided into two parts to avoid the use of brackets.

Additionally, there will be a folder with the Piccolo stencil divided into multiple parts to perform multi-color printing.

To print the Piccolo image extract the files from the zip, where you will find the models and a PDF document where I explain how to place the files in your laminator to print in multiple colors (you must perform the steps from number 16).

Resolution: 0.2-0.3 mm

Filling: 10-15 %.

Nozzle: 0.4 mm (having a larger diameter will reduce printing time but decrease the level of detail).

Wall line count: 2 -3 lines

Border: No

Raft: No

Support: No

Recommended average speed: 40-70 mm/s

Post-treatment: Gluing of the plate with the pencil holder body.

The printing order and distances in z are as follows:

1 - White -------------------------------------------------z=0mm

2 - Dark green-----------------------------------------z=1.2m

3 - Blanco-------------------------------------------------z=2.4mm

4 - Light green-------------------------------------------z=3.2mm

5 - Morado------------------------------------------------z=4mm

6 - Negro--------------------------------------------------z=4.8mm

7 - Rosa---------------------------------------------------z=5.6mm

8 - Amarillo-----------------------------------------------z=5.8mm

9 - Rojo----------------------------------------------------z=6.4mm