3D-printable Arduino pet robot
3D-printable Arduino pet robot
Published 2023-09-22T09:31:26+00:00
Snoopy was designed in Fusion 360 and printed using a Voron 2.4r2 350mm and a Prusa MK3S. It has an ESP32 micro-controller, Arduino firmware, two motors with a caster, a laser scanner sensor (and in a next revision a Raspberry Pi Pico with servos). It has an old smartphone or 7" tablet as display, microphone, audio and IMU.
Instructions and up-to-date files are available here https://makerspet.com/blog/meet-snoopy-pet-robot-model/ including Fusion 360 source files.
Snoopy runs on https://kaia.ai software platform developed at https://remake.ai.
If you are reasonably pleased with this design, please leave a like to help others discover this contribution!
Happy 3D printing!
PETG recommended, PLA is Ok but can loose integrity in a hot/sunny room
Date published | 22/09/2023 |
Dimensions | 350x350 |
Technology | FDM |
Support Free | YES |