Sparco Corsa Shift Knob Replica

The 'Sparco Corsa Shift Knob Replica' has been accurately modelled to match the original design. The original design can be seen through the link [https://sparco-corsa.com/product/gear-knob-2/]. The package includes 3 different shift patterns designed for 6-Speed Manuals, as well as a blank option.
Naturally, being a 3D printed plastic version, it may lack the same crisp aluminium CNC finish or weight in your hand as the original. However, it offers significant cost savings, priced at approximately 1/30 of the original, while still proving itself as a worthy contender.
The shifter has been meticulously modelled to replicate its true size, capturing every aspect of the original design. Equipped with an M18x1 Female Thread, the gear stick should fit most vehicles. To find the appropriate Male Thread suitable for your transmission shaft, please follow the link provided: [https://cults3d.com/en/3d-model/gadget/m18x1-male-threads-for-gear-sticks].

I recommend:
20% infill to minimize print time while ensuring strength. I generally use a cubic pattern, although most patterns are sufficient.
10% support infill to reduce print material and time, whilst allowing easier removal. However, this is situational and based on your printer’s capabilities. 20% support infill can significantly increase print reliability.
Print speed of 60mm/s. Again, this is situational and based on my printer’s capabilities. Most printers are capable of higher speeds, especially their default settings, although this can lead to less reliable results. Make sure to disable or decrease acceleration to reduce abrupt movements.
Lower layer height produces greater quality but is more time-consuming. I use a .2mm layer height, which encapsulates sufficient detail.
The print takes approximately 4 hours. Normal nozzles of .4mm can replicate the design.