quoridor

SPANISH

Quoridor board game. A game that should definitely be in your collection. If you don't know what it's about, the instructions are available for download, although if you want to get information about it, you can also send me a message. It consists of the board, 4 tokens for each player with geometric shapes for distinction (not appreciated in the print, that's why I attached them as well), and 20 walls. As for the printing, I would recommend changing the filament during the printing of the tiles so that the geometric shapes are better distinguished, as well as the board, in my case, changed the filament to make it two colors. I could also have left the squares where the tiles are placed in black, but I like it this way, it depends on the consumer's taste. Finally, if you have any questions or suggestions about a board game you would like to see in 3D, let me know. thanks a lot!

ENGLISH

Tabletop game Quoridor. A game that definitely should be in your collection. If you don't know what it's about, the instructions are available for download, but if you'd like to learn more about it, you can also send me a message. It consists of the board, 4 pieces for each player with geometric shapes for their distinction (they are not visible in the print, that's why I attached them as well), and 20 walls. As for the printing, I would recommend changing the filament during the printing of the pieces so that the geometric shapes stand out better, just like the board, in my case, I changed the filament to make it in two colors. I could have also left the squares where the pieces are placed black, but I like it this way, that depends on the consumer's preference. Finally, if you have any questions or suggestions about any board game you'd like to see in 3D, please let me know. Thank you very much!

SPANISH

0.28 and 15% padding should work without problems; however, you could try adjusting the settings further to save material and time. I printed it with the settings provided, and had no problems.

ENGLISH

0.28 and 15% infill should work without any issues; however, you could try adjusting the parameters further to save on material and time. I printed it with the provided settings, and I didn't have any problems.