FPV Racing Quad- / Hexa- / TriCopter frame

I've build a new Hexacopter specs below:

APM mini controller
10Hz Ublox GPS
10A SimonK ESC's
RCX 1804 2400kv motors
5030 GemFan props
Turnigy nano-tech 3S 2200 45-90C battery
FrSky X4R-SB 16 channel telemetry ACCST receiver
Bascom 600mW 5.8Ghz 32ch. mini Video transmitter with Mobius connector
Homebrew RGB lighting system
and i've used the anti-jello mount from my ZMR 250 frame with a new baseplate incl. in sourcefiles for my Mobius.
Weight w/o/ battery: 420 grams
Flight time with 2200maH battery > 7 - 7:30 minutes ( with mobius and VTX )

WarpQuad.Dual.NEW.Antenna.Frame.mount.STL

702 KB

WarpQuad.Dual Antenna.45deg.mount.STL

1.55 MB

WarpQuad_center_plate.V2.STL

5.79 MB

WarpQuad_leg.120mm.V2.STL

3.31 MB

WarpQuad_leg.120mm_antiWarp.STL

3.26 MB

WarpHeX_Mobius.anti-vib.mount.STL

2.82 MB

WarpHeX_Mobius.anti-vib.lens-protector.STL

663 KB

WarpHexa_Centerplate.STL

5.29 MB

TriWarp.Rear.Servo(HXT900).Yaw.Mount.STL

2.6 MB

TriWarp-V2.STL

4.08 MB

TriWarp.Rear.Motor.Yaw.Mount.STL

3.67 MB

WarpHeX_Mobius.anti-vib.top.mount.STL

1.71 MB