Dicebox Heavy
Dicebox Heavy
Published 2023-09-28T09:47:30+00:00
This Dicebox Heavy was made to hold the Norse foundry true metal dice sets (boulder and nimbus sets not included). due to their non standard cut, other dice sets may not fit.
Due to the nature of the more dense metals they offer, I felt the seperation of dies from the rest of my collection and each other was needed.
I have included a "universal" and "hollow" cut base and included a lid without the keeper bump to offer more utiliy for other dice sets and other uses. There is also a bump lid without the pattern if you want it blank.
Print a Lid and base of your choosing, latch file twice, and either print the included pin file 5 times or use 3mm filament sections.
When printing the base, it is recommended that you use support "touching buildplate" to support the latch pegs. everything else is self supported.
if you want the lid design to show up, you will need to set layer height to adaptive or at .2mm or finer.
Date published | 28/09/2023 |