Designed by
manuel_rivera
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary Adjustable Pocket Hole Jig with Vise For assembly you need the following: 1 Screw rod of aprox 100mm - 112mm long 2 bolt epoxy 2 1/4 copper coupling Printed using PLA with 0.250-0.300mm layer height and 25% infill Instructions For jig adjustment glue with epoxy the thread rod and the nut to the base. For the pocket hole jig with a solder iron place the nut inside the hole and place the two couplings inside the drilling holes to prevent damage of the drill bit to the PLA plastic
Design Files
File Size
Vise_Clamp.stl
27.1 KB
Goupille.stl
47.9 KB
Screw.stl
1.19 MB
Jig_Adjusment-.stl
103 KB
vise_clamp_nut.stl
344 KB
Pockect_Hole_Jig_Vise.stl
70.2 KB
Axe.stl
6.14 KB
Pockect_Hole_Jig_for_Vise.stl
186 KB
Comments