Couples of Horror Jack Sally Chucky Tiffany Skeletal Bride Groom Cameos

Fall is here, Halloween is right around the corner, and love is in the air. Not that happy Spring dawning kind of love, but the kind that sends tingling chills up your spine! Introducing... The Couples of Horror Spooky Silhouettes STL 4-Pack.

• Jack & Sally - The Nightmare Before Christmas
• Chucky & Tiffany - Bride of Chucky
• Skeletal Bride & Groom Cameos

TIPS FOR PRINTING AND HANGING

These are negative space silhouettes, so all you're printing is the black outline. They really pop against a white (or light-colored) background! If you have dark walls, you can print them in a light color filament instead.

The Jack & Sally and Chucky & Tiffany are wreathed by thematic heart-shaped frames. With so much negative space, they do not need any special hangers assembly. Simply place them over a nail, screw, hook, or tack, or use something like Glue Dots or Blue Tak to adhere them directly to a wall.

The cameos aren't from any Hollywood horror movie. We threw them in there just because we love them! We figure any married horror fanatic will appreciate them too. These files come in two versions - a flat one and one with hangers built in.

The "wHangers" editions print upside down so that the protruding hangers build up from the back. The flat pieces should be rotated to print whichever directions your printer provides the best surface - top or bottom. For example, glass beds (without glue) and textured PEI plates tend to look best face down.

DIMENSIONS
Our Happy Couples of Horror were designed to print on a 256x256 build volume, such as the Bambu P1P/P1S/X1C. If your build volume is 220x220 (Ender Pro 3, Aquila X2, etc), you can scale the X/Y down to about 90%, but keep the Z the same for structural integrity. On the Bride & Groom, you can keep the scale at 100% and simply rotate the file 45 degrees to fit.

At 100% scale, the files measure:

Jack & Sally NBC Fan Art
X = 24.0m / 9.4in
Y = 23.8cm / 9.4in
Z = 0.2cm / 0.08in

Chucky & Tiff Wall Art
X = 24.0cm / 9.4in
Y = 22.7cm / 8.9in
Z = 0.2cm / 0.08in

Skeleton Bride & Groom Cameo Wallart They are equal sizes
X = 17.2cm / 6.8in
Y = 24.8cm / 9.8in
Z = 0.6cm / 0.24in

If you like our loveably spooky wall art, be sure to Follow GetPrinted3D on Cults3D and check back soon. This is just the latest in an ongoing series of 3D printable Horror silhouettes.

• See All GP3D Creations on Cults3D

IMPORTANT: Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial Resell License to print and legally sell our designs here:
- Patreon.com/GetPrinted3D

Enjoy!

These are all very simple prints that require nothing more than basic settings and relatively quick speed. No supports or brims should be necessary. They do have some thin lines, so a layer height of 0.16 is strongly encouraged.

Recommended Settings are:
Layer Quality / Resolution: 0.16
Infill: 20%
Speed: 80mm/sec
Supports: No
Plate Adhesion: None