Skip to content

Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower

Push_side_labeled.gif Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
Standard_Labeled.gif Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
Instructions2.jpg Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
side.jpg Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
front.jpg Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
Push-front.gif Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
Back.jpg Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_towerBody.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_crown.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_roof.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_towerBase.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_pushLever.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_pushrod.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_pushrodAxle.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_screws x 4.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_chassisLeft.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_chassisRight.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_crownPin x 4.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
TowerOfDice-pair_principleAxle.stl Tower of Dice-pair Pushbutton D20 Launcher and Dice Tower
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1k views
  • 4 likes
  • 3 downloads
License
3D design format
STL Folder details Close
  • TowerOfDice-pair_chassisLeft.stl
  • TowerOfDice-pair_chassisRight.stl
  • TowerOfDice-pair_crown.stl
  • TowerOfDice-pair_crownPin x 4.stl
  • TowerOfDice-pair_principleAxle.stl
  • TowerOfDice-pair_pushLever.stl
  • TowerOfDice-pair_pushrod.stl
  • TowerOfDice-pair_pushrodAxle.stl
  • TowerOfDice-pair_roof.stl
  • TowerOfDice-pair_screws x 4.stl
  • TowerOfDice-pair_towerBase.stl
  • TowerOfDice-pair_towerBody.stl

Learn more about the formats
Publication date 2023-10-02 at 19:31
Design number 1488593
slightlycrazy3d

slightlycrazy3d

3D printer file info

3D model description

A dice tower like none other!

A fully functioning dice tower with a surprise. Remove the roof to load the magazine with up to twelve standard twenty sided dice* and press the little red button (assuming you also printed the button in red) at the base of the tower and watch them fire out the front one by one.

325mm (12.8") tall x 135mm (5.32") deep x 122mm (4.8") wide

Good rolls guaranteed!!**

*for best results use dice with more rounded off points
**statistical likelihood for good rolls is not affected. Just keep pumping out dice until this claim is true for you

3D printing settings

Print Settings:
Minimum Z axis: 220mm
Material: Tested in PLA and PETG but I see no reason you couldn't do ABS if you wanted.
Layer Height: .12mm
Wall Thickness: 1.6mm
Top/Bottom Thickness: 1.02mm
Infill: 20%
Support: Yes (see below)
Support Angle: 63 degrees
Support Density: 20
Raft: Not required

For Tower Body and Tower Crown: support everywhere
All the rest: support touching the build plate only

General notes:
1: Be gentle with the screws, they do not take much torque.
2: Paper or thin cloth can be slipped into gaps between chassis and body to help reduce noise a bit, but is not required.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.