MG000-MK01 Explosion Marker
$1.20 MG000-MK01 Explosion Marker
Published 2023-10-02T10:59:43+00:00
3D Printable Explosion Marker
Explosion marker
Size: 13mm base diameter by 16.3mm tall.
Supports: None should be necessary.
Scaling Notes: Green. This model should be safe to scale with straightforward scaling sliders.
A single file marker is provided; the illustrations show multiple markers which were printed in sets of ten.
This marker are suitable for use at any scale. They are used by the designer for 12mm and 25mm infantry games. While originally designed and used for Manoeuvre Group to be used as Suppression (painted orange) and Reaction (painted grey) they can be used for any set of rules that require a similar marker or to mark out extents of an artillery barrage or even painted to represent naval splash markers.
Photos of FDM print. (Prusa I3 Mk3)
Printing Specifications (FDM):
Recommended Layer Height: 0.2mm at default size for best output-to-time ratio.
Printing Time Estimate: 1h 28m for ten at 0.2mm layer height (using Simplify3D for Prusa I3Mk3, default settings).
Date published | 02/10/2023 |
Price | $1.20 |