MakerTron : Construction Bot

Prints (0)

Description

Construction Bot

  • Main Purpose

Building and assembling. Anything productive.

In case of emergency, interchangeable tools may be updated, and serve other purposes.

  • Main features

+ Hardhat/Mask

Protects the head and converts into a welding mask

+ Interchangeable Tools

Switch to any tool for the situation

+ Tool socket

Bot can carry two more tools to the site

  • Printing

We all know removing bunch of support material is painful.

Construction bot is designed to be printed without/ with minimum amount of support material. 

However, if you are printing with ABS, I recommend brim (base layer) so it stays on a platform.

Printing speed - ~50mm/s

Layer - 0.2mm (recommend 0.1mm for small pieces)

Infill - ~10%

Temp. - 220c

You should be able to easily assemble the parts after printing.

*** "(x2)" at the end of files name means, you need 2 of them.

*** I designed it considering tolerance, but I have not printed it yet. I will update the result soon.

Design Files

File Size

Tool2-body(x2).STL
156 KB
R-shoulder.STL
2.5 MB
Pin-neck.stl
39.4 KB
Foot(x2).STL
416 KB
L-lower-arm(x2).STL
1.1 MB
L-Shoulder.STL
2.5 MB
Upper-arm(x2).STL
1.1 MB
Pin-arm(x2).stl
39 KB
L-upper-leg.STL
2.58 MB
Pelvis.STL
1.49 MB
R-upper-leg.STL
2.55 MB
Tool2-claw(x4).STL
17.8 KB
Pin-legs(pelvis).stl
39.6 KB
Conveyor-belt(x8).STL
512 KB
Head1.stl
2.31 MB
Lower-leg(x2).STL
943 KB
Tool1-body(x2).STL
1.66 MB
Tool1-claw(x6).STL
508 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×