233111 Boeing 737-200 Up 3D print model

The 737-100/200 original variants were powered by Pratt & Whitney JT8D low-bypass engines and offered seating for 85 to 130 passengers. The 737-200 was a 737-100 with an extended fuselage, launched by an order from United Airlines in 1965 and entered service with the launch customer in April 1968. The 737-200 Advanced is an improved version of the -200, introduced into service by All Nippon Airways on May 20, 1971. After aircraft #135 , the 737-200 Advanced has improved aerodynamics, automatic wheel brakes, more powerful engines, more fuel capacity, and hence a 15% increase in payload and range over the original -200s and respectively -100s. The 737-200 Advanced became the production standard in June 1971. Boeing also provided the 737-200C (Combi), which allowed for conversion between passenger and cargo use and the 737-200QC (Quick Change), which facilitated a rapid conversion between roles. The 1,095th and last delivery of a -200 series aircraft was in August 1988 to Xiamen Airlines.

A detailed 3D printable model of Boeing 737-200 in 1/48 scale. Model with the designation of doors, windows, air intakes, high-lift devices and many separate parts. Model with JT8D engine series.

• Model code: 233111 Model kit Boeing 737-200 Up
• Scale: 1/48
• Engines: JT8D series
• Landing gear: up
• Fuselage length: 615.4 mm
• Full length: 636.2 mm
• Wingspan: 590.7 mm
• Parts quantity: 34
• 3D print complexity: 4/5
• Assembly complexity: 3/5
• Decals: none

The model requires gluing. 3D Printing Guidelines and Assembly Instructions are included.

The model is optimized for a 0.4 mm nozzle and 0.15 mm layers. Approximate ⌀1.75 mm filament length for one model (without stand) - 235.3 meters.

• Files format: .stl

Dimensions of the largest parts (in mm):

• Fuselage Center: 78.4 x 84.9 x 329.6
• Wing left/right: 19.2 x 181.1 x 274.2
• Stand: 110.0 x 120.0 x 98.3

The manual includes information about supports and printing recommendations.