2nd age Gondorian shield 3D print model

IMPORTANT: This 3D model is intended FOR PERSONAL USE ONLY. You cannot sell/donate/transfer it to third parties, make changes to this 3D model and sell/transfer/donate to third parties a modified 3D model under your own authorship. If you want to sell items printed or otherwise made using this 3D model, then for such cases on my Patreon marrion3d there is a subscription level Hand of Malenia which allows you to sell items printed or otherwise made using this 3D model under my authorship. For any questions - contact me in private messages.

The shield is based on the Lord of the Rings universe

Shield dimensions: height: 1130mm width: 480mm

There are 9 versions of the shield: -2nd-age-gondorian-shield_one-piece_uncut -2nd-age-gondorian-shield_one-piece_cut-400x400x400 -2nd-age-gondorian-shield_one-piece_cut-200x200x200 -2nd-age-gondorian-shield_only-patterns_uncut -2nd-age-gondorian-shield_only-patterns_cut-400x400x400 -2nd-age-gondorian-shield_only-patterns_cut-200x200x200 -2nd-age-gondorian-shield_shield-and-patterns_uncut -2nd-age-gondorian-shield_shield-and-patterns_cut-400x400x400 -2nd-age-gondorian-shield_shield-and-patterns_cut-200x200x200

In the one-piece-shield version, all the elements are connected together. The only-patterns version provides an option to use real wooden boards for the shield without printing plastic ones. In this version, the design does not have fasteners on the reverse side; it is smooth so that it can be freely glued to a wooden base. In the shield-and-patterns version, for ease of printing, painting and assembly, the pattern is separated from the wooden base.

Depending on the size of your printer, choose the version of the shield that suits you. If this is a cut-to-print version, all parts should be printed and then glued together. The parts have special holes and grooves for more convenient gluing.