PET bottles attachment - bottle shower - bottle shower

When we/I sunbathe on the lounger in the garden, a few splashes of water refresh enormously ... , and since I like to design, I have developed this attachment for PET sand bottles, and in such a way that no support material is required when printing ... .

It's fun to use, has something to do with upcycling, and most people think it's cool ... . Therefore, I give it away from time to time, machmal also as a souvenir, especially in the summer ... .

And of course you can also use it for watering flowers and plants and is a real eye-catcher .... .

But I had to find out that the threads on the bottles are different. This attachment fits perfectly on PET bottles from the "deit" limo; ... But with other bottles it will also be tight, if you screw in suitable seals or O-rings, or a suitable washer with ...

is super suitable as:

• Water plants

• watering yourself

• playing with water and splashing

• chase away wasps

• Water plants when absent (, if you put it in the ground ...)

• as a cool gift and a cool souvenir ...

The Stl file consists of 2 parts that must be printed at the same time!

Simply upload in slicer and

simply start printing without support material.

I print it with skirt (and 3 circulations) and.

25% infill

Printed on Prusa MKi3S, Anycubic Viper, Anycubic Mega and Snapmaker so far with no problems.

Recommended print settings

Scaling: 100%

Layer height of the first layer: 0.2, remaining layers: 0.3

Number of walls: 3

top/bottom: 4

Filling: 25%

Supports: none

Printing time: approx. 1.5 hours