Articulated cow with beer, Supportfree, print-in-place

Here comes the latest model of my articulated series on customer request :)

The cow has a bobble head and the lower legs dangle funny back and forth and she can super also sit. To be able to print the cow in up to 4 colors (AMS), I separated the beer glass in the now current version, which saves you a good printstd (when placing 7 cows a 10cm from head to toe) due to less material changes. I also made sure that the edges are sharp for the purpose of edge detection by Bambu-Studio.

To the head of the cow can be simply melted a key ring (with lighter and tongs heat the ring screw, caution danger of burning! and then screw into the top of the head) to hang this model bspw. Beer glass then glue into the hand of the cow after printing

Purchase of this file entitles you to private use only, no sale of the data or physical prints.

To get the commercial use license, it is mandatory to have a corresponding membership on my Patreon page, there are also more of my models:

https://www.patreon.com/TKS3D

For printing the stl file I recommend to separate the beer there is a gap, for the purpose of gluing the main model and the beer glass together (more accessories or variants will follow), otherwise there may be printing problems.

For Bambu Studio users, I recommend the use of the .3mf file, because there are already the different areas are pre-colored and on the hooves the edge detection in the direction of the back is not so pleasant to use (partly to reduce to 10 ° edge detection) and on the hair strand small gaps in the edge detection can occur.

The cow can WITHOUT PROBLEMS but also printed in one color and then hand painted!

Recommended printer coarse settings:

Nozzle size 0.4mm

Layer thickness: 0.2mm with adaptive layer height in flat surface areas, especially eyes

No support needed!

Should scaling be done, make sure that at least 2 walls are printed at the joints.