DRAPED ELEGANCE | Table Lamp

DRAPED ELEGANCE | Table Lamp

Want to buy a physical 3D print of this product?
Head to Trajann online store.

Enhance your space with our captivating table lamp shade that mirrors the natural charm of a draped fabric. This shade bathes your surroundings in gentle, warm light, creating an inviting atmosphere that effortlessly combines elegance with an organic touch.

It rests on a sleek tripod, designed for either E14 or E26 & E27 bulb sockets.

This lamp shade was designed to be printed fast, in a couple of hours in vase mode.

You can get the power cords from Amazon here:

For Europe:
E27 cord:  https://amzn.to/3OVrZjK
E14 cord:  https://amzn.to/3TchBqs

For the US:
E26/E27 cord:  https://amzn.to/3V5VYJB

There are 2 versions of the lamp:
- the original one
- and a smaller version that can fit on PRUSA printers with 210 x 120 x 220mm printing volume.

Also, each shade comes in 2 versions:
- a smooth surface version (the original)
- and a textured version with little bumps all over to make it look more like paper/fabric, which helps hiding little printing defects.

SHADE (Large) | Ø 230 x H 225 mm | Printing: 2h ~ 3h (vase mode)
SHADE (For Prusa) | Ø 208 x H 218 mm | Printing: 2h ~ 3h (vase mode)

E14 BASE (Large) | W 200mm x L 175mm x H 107 mm | Printing: 2h ~ 3h
E14 BASE (for Prusa) | W 180mm x L 157mm x H 107 mm | Printing: 2h ~ 3h

E26/E27 BASE (Large) | W 200mm x L 175mm x H 107 mm | Printing: 2h ~ 3h
E26/E27 BASE (for Prusa) | W 180mm x L 157mm x H 107 mm | Printing: 2h ~ 3h

SHADE:
The shade must be printed with bottom and top faces "open".
You can either use the "spiralize" function to print in "vase mode" with 1 wall perimeter only (fine for the smooth shade version).
If you want 2 lines in your walls (recommended for the textured shade), do not activate "spiralize", but instead use the following settings:
Resolution: 0.2~0.3mm / layer or less
Wall Line Count: 2
Infill: None
Top layers: 0 (to get rid of the top face)
Bottom layers: 0 (to get rid of the bottom face)
Build adhesion type: 6~8mm brim
Supports: None

BASE:
The base must be printed upside-down, so with the feet pointing up, and the round opening for the E14 socket on the printing bed.
Resolution: 0.2~0.3mm / layer or less
Wall Line Count: 2
Infill: 15~20% gyroid
Build adhesion type: 6~8mm brim
Supports: None

Charles_Regaud

DIAMOND RIDGES | E27 Lamp Shade & base

• 1.3k views
• 8 likes
• 8 downloads
• 2 collections
• 0 comments
• 1 make

Download US$3.10

Charles_Regaud

DELTA RIDGE | Table lamp fast print

• 3.7k views
• 26 likes
• 21 downloads
• 3 collections
• 0 comments
• 0 makes

Download US$3.10

Charles_Regaud

BOOM | Speaker Box for Smartphones

• 5.6k views
• 47 likes
• 41 downloads
• 3 collections
• 0 comments
• 0 makes

Download US$2.03

Charles_Regaud

CANNELÉ | Wall / Fridge Planter

• 3.7k views
• 44 likes
• 47 downloads
• 3 collections
• 0 comments
• 0 makes

Download US$2.03

Charles_Regaud

DELTA STORAGE BOX | with lid and dividers

• 1k views
• 10 likes
• 2 downloads
• 2 collections
• 0 comments
• 0 makes

Download US$3.10