Barbasol Can 510 Cartridge Holder

Barbasol Can 510 cartridge holder inspired by Jurassic Park.

Version 1: Kind Pen Mist + 3 cartridge slots
-KP - Base.stl
-KP - Middle.stl
-KP - Top.stl
-KP - Pin.stl
-Optional - Cartridge Lift.stl
-Optional - KP Lift.stl

Version 2: 5 cartridge slots + 1 slot for taller pen
-TP - Base.stl
-TP - Middle.stl
-TP - Top.stl
-TP - Pin.stl
-Optional - Cartridge Lift.stl

Barbasol Can Insert:
-Can - Base Insert.stl
-Can - Surround.stl

PLEASE NOTE

-I've included two versions, both of which can be removed and used without the can.

-Holders alone measure 1.75" diameter by ~2" tall.

-The pins are a little extra long in case you need to adjust, so you'll need to cut them down to size.

-The pins will go through the stands to help keep it lined up, but you'll want to superglue it together for the final piece.

-The optional cartridge inserts will fit into the slots loosely to lift the cartridges up or allow a 6th cartridge instead of a tall pen in version 2.

-The optional insert for the Kind Pen will lift the Mist high enough for the micro USB charge port to be accessible.

-This is for 10.6mm cartridges and the slots are relatively tight to keep them from sliding around in the can while it's sealed.

-The can I used was purchased here: https://www.vat19.com/item/can-safe-distraction-safes