Battle Robot 3lb

Battle Robot 3lb Battle Robot 3lb Battle Robot 3lb Battle Robot 3lb

Includes various designs:

--Normal battle shell

-Top cover

-Bottom cover

-Brushless bracket (Modifiable in step)

-Pololu motor mount

-Bottom skids

-Topologically optimized design

-Weapon not included (General recommendations)

Electronics:

-Brushless motor model A2212. RPM/V: 1000KV

• 2 Novamax 800 rpm 6v motor.

• 2 Banebots 400 2 3/8 tires

• 2 Hubs 3mm

• SaberTooth Dual 5A Motor Controller

-450 mA 2S lipo battery

-650 mA 3S lipo battery

-Switch

-(Depending on volatje and current you use in motors you get the values to use in the lipo battery).

**Other materials

-(Housing) 4 x M5-50mm with locknuts

-(Brushless bracket) 3 x M4- 10 mm with nuts

-(Pololu bracket) 4 x M3 -10mm with nuts

-(Skids) 4 x M4 with nuts

-2 Rulimán of 20 mm outside and 4 mm inside, being approximate values.

**How was the creation of the 3lb battle?

Video Tiktok

General recommendations:

-Two protruding bolts would be placed on the top of the housing acting as skids and when turning, follow in battle.

• The weapon does not include as it has to be made of metal, either aluminum or some other material.

-Pulleys must be placed for the rotation of the weapon.

Layer height: 0.2 mm

Print speed: 60 mm/s

Filling: Can vary between 80% and 100% (Recommendation 100%)

Media: No (except media)

Material: PLA (Recommendation one more resistant PTEG, C-Fiber, etc.)