Skip to content

LxW Red Shift - mITX PC Case - Fully 3D Printable - Free

mITX_Case_Gapped_FullHeightGPU_SideIO_Smaller-2-_Camera_Iso-View-1-1.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231030_063303927_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231011_063343502_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
mITX_Case_FullHeightGPU_FrontIO_Camera_In-Depth-View-1-1.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_054837174_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_055226976_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_055936430_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_055354488_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_054703883_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_055810809_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231011_063438702_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231011_064238992_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231012_054442058_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231011_061914177_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
IMG_20231030_063840638_3072-x-3072.png LxW Red Shift - mITX PC Case - Fully 3D Printable - Free
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.5k views
  • 10 likes
  • 73 downloads
License
3D design format
ZIP Folder details Close
  • LxW_RedShift.zip
    • Bottom/P_mITX-Bottom_Front.STL
    • Bottom/P_mITX-Bottom_Front_EvenSmaller.STL
    • Bottom/P_mITX-Bottom_Front_LxW.STL
    • Bottom/P_mITX-Bottom_Front_NoSideIO.STL
    • Bottom/P_mITX-Bottom_Front_SFX.STL
    • Bottom/P_mITX-Bottom_Front_SFX_EvenSmaller.STL
    • Bottom/P_mITX-Bottom_Front_SFX_NoIO.STL
    • Bottom/P_mITX-Bottom_Front_SFX_Small.STL
    • Bottom/P_mITX-Bottom_Front_SFX_Smaller.STL
    • Bottom/P_mITX-Bottom_Front_Small.STL
    • Bottom/P_mITX-Bottom_Front_Smaller.STL
    • Bottom/P_mITX-Bottom_Rear.STL
    • Bottom/P_mITX-FeetP1.STL
    • Bottom/P_mITX-FeetP2.STL
    • Bottom/P_mITX-FeetP2_NoIO.STL
    • Bottom/P_mITX-FeetP3.STL
    • Bottom/P_mITX-FeetP4.STL
    • Bottom/P_mITX-Front_IOSmaller.STL
    • Bottom/P_mITX-Front_IO_Cover_1.2.STL
    • Bottom/P_mITX-Front_IO_Cover_1.3P1.STL
    • Bottom/P_mITX-Front_IO_Cover_1.3P2.STL
    • Bottom/P_mITX-Front_LxW.STL
    • Bottom/P_mITX-PwrRst_Case_Full.STL
    • Bottom/P_mITX-Pwr_Button.STL
    • Bottom/P_mITX-Rst_Button.STL
    • Front/P_mITX-Front.STL
    • Front/P_mITX-Front_FrontIO.STL
    • Front/P_mITX-Front_FrontIO_DeeperSidePanels.STL
    • Front/P_mITX-Front_FrontIO_DeeperSidePanels_EvenSmaller.STL
    • Front/P_mITX-Front_FrontIO_DeeperSidePanels_Small.STL
    • Front/P_mITX-Front_FrontIO_DeeperSidePanels_Smaller.STL
    • Front/P_mITX-Front_FrontIO_DeepSidePanels.STL
    • Front/P_mITX-Front_FrontIO_DeepSidePanels_EvenSmaller.STL
    • Front/P_mITX-Front_FrontIO_DeepSidePanels_Small.STL
    • Front/P_mITX-Front_FrontIO_DeepSidePanels_Smaller.STL
    • Front/P_mITX-Front_FrontIO_EvenSmaller.STL
    • Front/P_mITX-Front_FrontIO_FlatSidePanels.STL
    • Front/P_mITX-Front_FrontIO_FlatSidePanels_EvenSmaller.STL
    • Front/P_mITX-Front_FrontIO_FlatSidePanels_Small.STL
    • Front/P_mITX-Front_FrontIO_FlatSidePanels_Smaller.STL
    • Front/P_mITX-Front_FrontIO_Small.STL
    • Front/P_mITX-Front_FrontIO_Smaller.STL
    • Front/P_mITX-Front_NoFrontIO.STL
    • Front/P_mITX-Front_NoFrontIO_DeeperSidePanels.STL
    • Front/P_mITX-Front_NoFrontIO_DeeperSidePanels_EvenSmaller.STL
    • Front/P_mITX-Front_NoFrontIO_DeeperSidePanels_Small.STL
    • Front/P_mITX-Front_NoFrontIO_DeeperSidePanels_Smaller.STL
    • Front/P_mITX-Front_NoFrontIO_DeepSidePanels.STL
    • Front/P_mITX-Front_NoFrontIO_DeepSidePanels_EvenSmaller.STL
    • Front/P_mITX-Front_NoFrontIO_DeepSidePanels_Small.STL
    • Front/P_mITX-Front_NoFrontIO_DeepSidePanels_Smaller.STL
    • Front/P_mITX-Front_NoFrontIO_EvenSmaller.STL
    • Front/P_mITX-Front_NoFrontIO_FlatSidePanels.STL
    • Front/P_mITX-Front_NoFrontIO_FlatSidePanels_EvenSmaller.STL
    • Front/P_mITX-Front_NoFrontIO_FlatSidePanels_Small.STL
    • Front/P_mITX-Front_NoFrontIO_FlatSidePanels_Smaller.STL
    • Front/P_mITX-Front_NoFrontIO_LxW.STL
    • Front/P_mITX-Front_NoFrontIO_Small.STL
    • Front/P_mITX-Front_NoFrontIO_Smaller.STL
    • Front/P_mITX-PwrRst_Case.STL
    • Front/P_mITX-PwrRst_Case_Small.STL
    • LxW_RedShift_Notice_Link.txt
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Bridge.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Bridge_EvenSmaller.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Bridge_LxW.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Bridge_Small.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Bridge_Smaller.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Cover.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Cover_EvenSmaller.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Cover_LxW.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Cover_Small.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_Cover_Smaller.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_PowerCable_Cover.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_PowerCable_Cover_Longer.STL
    • Middle Plate/P_mITX-MiddlePlate_CableManagement_PowerPlug_Cover.STL
    • Middle Plate/P_mITX-MiddlePlate_Motherboard.STL
    • Middle Plate/P_mITX-MiddlePlate_PSU_Shroud.STL
    • Middle Plate/P_mITX-MiddlePlate_SFXBracket_v1.2_Left_100mm.STL
    • Middle Plate/P_mITX-MiddlePlate_SFXBracket_v1.2_Left_125mm.STL
    • Middle Plate/P_mITX-MiddlePlate_SFXBracket_v1.2_Left_150mm.STL
    • Middle Plate/P_mITX-MiddlePlate_SFXBracket_v1.2_Right_100mm.STL
    • Middle Plate/P_mITX-MiddlePlate_SFXBracket_v1.2_Right_125mm.STL
    • Middle Plate/P_mITX-MiddlePlate_SFXBracket_v1.2_Right_150mm.STL
    • Middle Plate/P_mITX-MiddlePlate_SSD&PSU.STL
    • Middle Plate/P_mITX-MiddlePlate_SSD&PSU_v1.2_Flex.STL
    • Middle Plate/P_mITX-MiddlePlate_SSD&PSU_v1.2_SFX.STL
    • Middle Plate/P_mITX-MiddlePlate_SSD_Shroud.STL
    • Middle Plate/P_mITX-PCIeRiser_Support.STL
    • Middle Plate/P_mITX-PCIeRiser_Support_ExpansionSlotGap.STL
    • Rear/P_mITX-Rear.STL
    • Rear/P_mITX-Rear_GPU_InstallBracketP1.STL
    • Rear/P_mITX-Rear_GPU_InstallBracketP2.STL
    • Rear/P_mITX-Rear_GPU_InstallBracketP2_LowProfile.STL
    • Side Panels/P_mITX-SidePanel1P1_Airflow.STL
    • Side Panels/P_mITX-SidePanel1P1_NoAirflow.STL
    • Side Panels/P_mITX-SidePanel1P2_Airflow.STL
    • Side Panels/P_mITX-SidePanel1P2_NoAirflow.STL
    • Side Panels/P_mITX-SidePanel2P1_Airflow.STL
    • Side Panels/P_mITX-SidePanel2P1_Airflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P1_Airflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P1_NoAirflow.STL
    • Side Panels/P_mITX-SidePanel2P1_NoAirflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P1_NoAirflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P1_SFX_Airflow.STL
    • Side Panels/P_mITX-SidePanel2P1_SFX_Airflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P1_SFX_Airflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P1_SFX_NoAirflow.STL
    • Side Panels/P_mITX-SidePanel2P1_SFX_NoAirflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P1_SFX_NoAirflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P2_Airflow.STL
    • Side Panels/P_mITX-SidePanel2P2_Airflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P2_Airflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P2_NoAirflow.STL
    • Side Panels/P_mITX-SidePanel2P2_NoAirflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P2_NoAirflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P2_SFX_Airflow.STL
    • Side Panels/P_mITX-SidePanel2P2_SFX_Airflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P2_SFX_Airflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2P2_SFX_NoAirflow.STL
    • Side Panels/P_mITX-SidePanel2P2_SFX_NoAirflow_Deep.STL
    • Side Panels/P_mITX-SidePanel2P2_SFX_NoAirflow_Deeper.STL
    • Side Panels/P_mITX-SidePanel2_Bridge.STL
    • Side Panels/P_mITX-SidePanel2_Bridge_Deep.STL
    • Side Panels/P_mITX-SidePanel2_Bridge_Deeper.STL
    • Top/P_mITX-Top_Front.STL
    • Top/P_mITX-Top_Front_SFX.STL
    • Top/P_mITX-Top_PSU_PlugCache.STL
    • Top/P_mITX-Top_Rear.STL
    • Top/P_mITX-Top_Rear_AIO_Bridge_Front.STL
    • Top/P_mITX-Top_Rear_AIO_Bridge_Front_Shorter.STL
    • Top/P_mITX-Top_Rear_AIO_Bridge_Rear.STL
    • Top/P_mITX-Top_Rear_AIO_Pt1.STL
    • Top/P_mITX-Top_Rear_AIO_Pt2_Front.STL
    • Top/P_mITX-Top_Rear_AIO_Pt2_Front_Shorter.STL
    • Top/P_mITX-Top_Rear_AIO_Pt2_Rear.STL
    • Top/P_mITX-Top_Rear_AIO_Pt2_Rear_Shorter.STL
    • Top/P_mITX-Top_Rear_AIO_Pt3_Front.STL
    • Top/P_mITX-Top_Rear_AIO_Pt3_Front_Shorter.STL
    • Top/P_mITX-Top_Rear_AIO_Pt3_Rear.STL
    • Top/P_mITX-Top_Rear_AIO_Pt3_Rear_Shorter.STL

Learn more about the formats
Last update 2023-10-31 at 15:34
Publication date 2023-10-12 at 13:57
Design number 1509845
LAZYXWORKSHOP

LAZYXWORKSHOP

3D printer file info

3D model description

Hi !

Are you searching for a fresh approach to PC building ?

Your search ends here. I am excited to present my innovative mITX PC case design.
This design offers a unique twist on your standard PC case, providing you with a fresh perspective for your next build.

Features:

1. Compact and Modular Design: My PC case design boasts a unique, compact, and modular structure that maximizes your available space. This means you have the freedom to build your dream PC while keeping it sleek and portable.

2. Versatility and Customization: This design is all about versatility and customization. It's engineered to be modular, offering you endless possibilities to tailor your PC to your specific needs, whether you're a gamer, content creator, or enthusiast.

3. mITX Motherboard Compatibility: I've designed this case with mITX motherboards in mind, ensuring that you can harness the latest processors and features without compromise.

4. CPU Cooler Height: With support for CPU coolers up to 76mm(91mm soon) in height, you have the flexibility to select from a wide range of cooling solutions, ensuring your system remains whisper-quiet even under heavy loads.

5. Graphics Card Support: This PC case design can accommodate both full-height and low-profile graphics cards, with support for cards up to 340mm in length and three expansion slots wide. GPU compatibility is no longer a concern.

6. Dedicated Flex ATX Support: My design is optimized for Flex ATX power supplies, ensuring a perfect fit and seamless integration, making your PC both powerful and sleek.

7. 2.5" Storage Drive Expansion: With not one but two dedicated 2.5" storage drive slots, our design ensures you have ample space for SSDs or HDDs, allowing you to store your data, games, and applications with ease, without compromising on your compact PC build's efficiency.

8. Superior Cooling: This design includes two dedicated slots for 140mm and 120mm fans, allowing you to fine-tune your cooling setup and keep your system running optimally.

9. Cable Management: I know that clean cable management is crucial for an efficient build. This design provides multiple covers for superior cable management, ensuring your rig looks as good as it performs.

10. Front Panel Customization: You have the freedom to choose the placement of your front panel connectors, whether on the side of the case, on the front, or both, for unparalleled convenience.

11. Slot-in Graphics Card System: Forget the hassles of graphics card installation. This design features a slot-in graphics card system for an almost hot-swappable mechanism, saving you time and frustration.

12. Excellent Airflow: I understand the critical importance of proper airflow in maintaining your hardware's peak performance. With my design, you can rest assured that your components will stay cool even during intense gaming sessions or resource-intensive tasks.

Summary of the features:

  • mITX motherboard
  • Full height and low profile GPU up to 340mm
  • Up to 3 slots width GPU
  • Flex ATX PSU
  • 2x 120/140mm fan
  • 2x 2.5” drives

Now, you can take control of your PC build like never before with this exclusive PC case design. Get ready to elevate your PC building experience to a whole new level.

Update 1:
Adding new side panels with deeper sides for a better compatibility with taller CPU cooler.
Adding the original side panels (flat).
Adding new front panels variants accordingly to the new side panels.
Update 1.2:
Adding support for AIO CPU coolers up to 280mm.
Adding support for flex ATX form factor PSUs.
Adding variations to current parts that are affected by the support of AIOs and flex ATX PSUs.
(Due to lack of budget/parts, flex ATX PSUs haven't been tested physically)

All the links for the parts to be bought are in the notice.

For more content like this, infos on the current state and development of the projects, follow me on Instagram

3D printing settings

  • Layer height: 0.24mm
  • Nozzle size: 0.4mm
  • Line width: 0.42-0.45mm
  • Walls number: 2
  • Infill density: 15% (Bambu Studio)
  • Support needed sometimes
  • Brim needed sometimes

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.