SunShade With The Hole [ Standard 55mm]

If you own one of ATN's X-Sight 4K series products,
you may need an "non metallic" SunShade With an hole on it like the one shown here.

An all in one device for a better picture definition during the day time without needing to mount the supplied "metal" sunshade and affix the famous "cap with the hole" on its mouth.
I hate to screw the original one... its metallic, and every time you trie to mount it on ( or remove it ) it makes a terrifying sound like an eagle desperately calling for its young...
By printing it in synthetic material this problem disappears definitively.

Here you can find the "bundle version".

Object's Size
D 64mm X 55mm ,With D 13mm Hole in the middle.

Note : if you need an other inner Diameter let me know its dimension.
I find that the one in my design is the best choice for me.

Note: If you have purchased the product for your personal use, you can print as many pieces as you need.
However, if you intend to give them away to someone or if a friend asks you to make them for him/her, I would appreciate it if you could persuade your friend to purchase the project/design here on Cults3D before printing it for him/her.
I've spent many hours developing my accessories...
Best Regards!

I use PLA/PLA+ because it is a biodegradable material and in case the object is lost in the field we shouldn't worry about having polluted the soil.

For the printing parameters nothing particular...

Slicer : Ultimaker Cura
Nozzle : 0.4mm
Profile : Normal ( 0.15mm )
Support : NO
Adhesion : Skirt ( Skirt Distance : 5 mm )
Infill : 100% ( but you can use whatever you want )
Bed Temp : 65°C
Hot End : 198°C
Print Position : As Is!
Material : eSun ePLA-Matte ( Black )

Edit: modified the design by rounding the outer corners of the main cylinder and smoothing the inner/outer edges of the central hole.