Jack Daniel's Logo Lightbox LED Lamp

The 3D model of a lightbox featuring the Jack Daniel's logo is a captivating ode to a legendary brand. The iconic Jack Daniel's logo, with its timeless charm and distinct design, takes the spotlight. When illuminated, the lightbox exudes a warm and inviting glow. Let this lightbox infuse your space with the spirit of a true American classic, adding a touch of heritage and sophistication to your surroundings. 🥃✨

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB
https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra
- soldering iron (optional)

RECOMMENDATIONS
- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with the soldering iron or in the slicer
- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl+P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning treshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%

Assembly video: 
https://www.youtube.com/watch?v=QNsShLmXYh0