Stingray Deep Sea Explorer

Dive deep with this stingray-inspired 3D model, a tribute to the majesty of nature's underwater gliders. I've meticulously designed this Deep Sea Explorer, drawing inspiration from the elegant form and movement of stingrays. Every detail has been crafted with precision, ensuring a smooth printing experience. Whether you're a marine enthusiast, a lover of unique designs, or someone who appreciates the beauty of the ocean's creatures, this model will be a captivating addition to your collection. Display it proudly on your desk, shelf, or as part of a marine-themed diorama. Embark on an underwater journey with this stingray-inspired masterpiece!

Material: PLA (Polylactic Acid)

Layer Height:

Standard Quality: 0.2mm
High Quality: 0.1mm
Infill:

Standard: 20%
For Increased Strength: 50%
Wall Thickness:

0.8mm (this typically means 2 walls for a 0.4mm nozzle)
Top/Bottom Thickness:

0.8mm (this typically means 4 layers for a 0.2mm layer height)
Print Speed:

Standard: 50mm/s
Detail Areas: 30mm/s
Supports:

Use if the model has overhangs greater than 45°. Depending on the model's design, you might need supports everywhere or just touching the build plate.
Build Plate Adhesion:

Type: Skirt/Brim for better adhesion and to ensure the filament is flowing correctly before the print starts.
Temperature:

Nozzle: 200°C - 220°C (Adjust based on your specific PLA brand)
Bed: 60°C - 70°C
Cooling: Enable the cooling fan after the first few layers. This helps with bridging and overhangs.

Retraction: Enable to reduce stringing. Typical settings are:

Distance: 5mm
Speed: 40mm/s