Twilight Imperium + Prophecy of Kings organizers, Player Set

A set of organizers for player components in Twilight Imperium 4th edition board game with Prophecy of Kings expansion. The full set of my Twilight Imperium + Prophecy of Kings organizers is available here. (Player Set is a part of the full set).

Player Set contains:
- Unit organizer, container,
- Unit organizer, 8 different lids,
- Player's card storage container,
- Player's card holder.

UNIT ORGANIZER:
All player's units are organized in a functional and nice-visual arrangement. Contours on the plate indicate where to put each kind of unit. There's also a hatch for a chosen-in-game Strategy cards. It is big: 207 x 213 mm.
A sliding lid closes the Unit container. There are 8 different lids provided for each player. Decorative cutouts are related to the TI universe. There is also a simple lid without decorations - if you prefer.

PLAYER'S CARD STORAGE CONTAINER: Basic player's cards are divided in 3 groups and accommodated in 3 slots in a simple Storage card container. Thanks to several posts inside the Unit container, it can be kept firmly there in place during the storage.

PLAYER'S CARD HOLDER: During the play different types of player's cards are organized here: 4 types of Technology decks: blue, green, yellow and red, Unit upgrade technology cards and Promissory Note cards. Decks are arranged in cascade, so you can see the name and cost of the first card in each deck. Cutouts in the front wall ensure visibility of Unit's values after the upgrade. Back walls are not vertical, but slightly slanted to provide very good view.

Card storage container and Card holder are designed for cards in sleeves.

Some photos in higher resolution:
8 Unit organizers
Player's components set up
Opening Unit organizer
Unit organizer filled
Unit organizer empty
Organizers at the game set up

ACKNOWLEDGEMENTS: Special thanks to Arimistar and his friends. This design wouldn't have happened without their support.

Here are links to my previous designs: TI 4th ed. for cards without sleeves and TI 4th ed. for cards with sleeves. In these designs lids are not provided.

All organizers were 3Dprinted on Prusa MK4:
- in PLA (F3D Blue pearl),
- No support is needed,
- Infill 10-15% gyroid,
- Use 0.15 mm layer height (at least for lids and lid's guides to ensure they work very well),
- 0.2 mm layer height is ok for Player's card container.
- Monotonic top and bottom fill provides good quality of lids.
Note1: I use slightly changed default Print settings "0.15mm SPEED MK4" in PrusaSlicer.
Note2: Unit organizer is very large - its dimensions are: 207 x 213 mm. I used 1.7 mm brim width, so it fits the bed area of Prusa MK4.