Lack 3d printer enclosure assembly pieces

Pieces to join 2 lack tables into a cabinet. Where applicable use #6 countersink wood screws to secure the bracket and leg in place. 2 Leg screws are optional if you wish to leave them out for occasionally completely removing the enclosure. The legs are a snug fit into the brackets. Screws are in locations that are not clearly visible from the exterior of the cabinet or located under the leg itself. The brackets incorporates a glass stop intended to work with these hinges and my other pivot design for vertically hung glass sides.

The cabinet stops allow for modular cabinet disassembly when glass is hinged vertically using my other pivot design (not the pivots here designed horizontal swinging. I know I sometimes want to get at something that has a tendency to need tinkering... like a 3d printer and when that happens the last thing I want to deal with is the cabinet in the way hence the modular break-down design.

Check out my other designs to mix and match components to customize your own cabinet. Everything is there to assemble the entire custom outer enclosure using two Lack tables as the basis.

2 Sizes of glass. Standard file is 2 for mil. "3.2mm" file is for 3 mil.

Sliced in Cura. Printed in PLA with 30% Infill, No supports, 1.2mm wall/top/bottom thickness.