Expandable Sunglasses / Glasses Holder Wall Mount

I've been enjoying learning 3D Modeling to help solve some of my everyday problems by designing solutions and 3d printing them. This last design was to solve the problem of too many sunglasses and nowhere to put them. I tend to lose sunglasses a lot, mostly because I put them somewhere and forget them. I don't have that one spot to keep them all. So I built this sunglass wall mount. Now I know where they are and which ones are missing. Note: the last pair are my wife's glasses, not mine. :) She now wants one of these mounts for her.

*How To Print This: *
You can print as many Main parts to fit your glasses collection. You will need to print 2 End caps to finish it off and as many pegs to help link them together.

*Considerations: *
The only glasses I had that were a little unstable were some of the RayBan styles were the arms of the glasses were really thick. They still fit well, but not as good as the others.

Depending on your printer, the pegs may go in easy or not so easy. I shurnk them down a .25 mm to help them fit easier. If they are too loose on your printer, you can scale it up a touch. You want a decent fit to avoid glue, or just glue it if you know all you need is a few hooks.

I mounted mine with a peelable double sided tape, but I think the Command Strips would work too.