KC-02 Static Bolt - For STANDARD Hop Unit

I designed these a while ago when I wanted to convert my KC-02 to a 'bolt action' sniper, at the time I did not have the ability to buy a Genesis Kit (out of stock) so I only had the standard Hop unit that comes with the KC-02.

I have since bought a Genesis Kit and also the Solid State bolt from RW, and my advice to you is to do the same if you can, the parts from RW are superb, I can't fault them.

I'm uploading these models not to try and take anything away from RW, I have bought their stuff, and you should too!

However, IF you have the standard hop unit, and IF you want to try running your KC-02 as a 'sniper' with a manual bolt, then feel free to download and print these.

THESE WILL NOT WORK WITH THE GENESIS HOP UNIT!

I created multiple versions which have different restrictions in the bore of the nozzle to help you tune the power, the percentages are based on the cross sectional area, not the diameter, for example the 100% version has a thru bore of 5.3mm (22.06mm^2) whereas the 50% version has a restricted bore to 3.75mm (11.04mm^2).. you get the idea.

Please note that you will still most likely need to install weaker hammer springs for these to work!

Your gonna need to print these on a resin printer to get the accuracy, and use ABS tough resin, they might not last forever, but at least you can print another!