Triangle Mold Housing - 3 Corners - 180mm - Reusable Mold Making Box

Print your own triangle shaped mold housing at home and save money! You can use it to make a silicon mould and cast your own art to sell. 3D print durable and reusable mold moking tools that are easy to use, making it the perfect tool for resin/epoxy enthusiasts and DIYers.

You will need to make 3 prints of each corner to make one complete triangle frame. You will also need to print 1 lifted base. The walls can be held together with binder clips. For larger molds I strongly suggest using hot glue.

SIZES:
- Triangle Wall Measurements: [ 7in ][ 180mm ]
- Heights in mm: 50 100, 150, 200
- Vertical Walls are min of 0.2in [5mm] thick
- Vertical Wall Base is 1in [25mm] wide by 0.2in [5mm] thick

COPYRIGHT & USAGE
Please do not share or sell these digital files. As the creator of these files, I have exclusive rights to sell them and would appreciate your support in protecting my work. You may not redistribute the STL files or upload them to websites like Thingiverse or MyMiniFactory. However, you are welcome to print as many copies as you need for personal use or to sell molds casted from the print. If you have any other usage in mind, please contact me first. Thank you for respecting my creative work!

Layer Height: 0.2mm
Top/Bottom Layers: 4
Perimeters: 3 or 4
Seam: Nearest
Infill: 15%-20% Gyroid or Grid Pattern
No Supports
Temperature settings are dependent on filament and printer