Skip to content

Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready

1.2.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
IMG_1169.jpeg Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
20240305_115621.jpeg Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
20240305_115635.jpeg Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
20240305_115640.jpeg Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
20240305_115814.jpeg Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
2.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
3.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
4.0.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
4.1.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
5.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
6.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
7.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
8.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
9.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
10.png Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
pommel.stl Toji Fushiguro Dagger -- Jujutsu Kaisen Cosplay -- Inverted Spears of Heaven -- 3D Print Ready
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.9k views
  • 15 likes
  • 42 downloads
  • 1 collection
  • 2 comments
License
3D design format
STL and ZIP Folder details Close
  • inverted_spear_of_heaven_by_rbq.zip
    • chain/chain_20cm.stl
    • chain/chain_single_2mm.stl
    • chain/chain_single_4mm.stl
    • chain/chain_single_6mm.stl
    • one_piece/blade_fabric_grip_flat_metal.stl
    • one_piece/blade_fabric_grip_textured_metal.stl
    • one_piece/blade_flat_grip_flat_metal.stl
    • one_piece/blade_flat_grip_textured_metal.stl
    • sliced/blade_scratched_lower.stl
    • sliced/blade_scratched_upper.stl
    • sliced/blade_smooth_lower.stl
    • sliced/blade_smooth_upper.stl
    • sliced/grip_fabric_textured.stl
    • sliced/grip_smooth.stl
    • sliced/habaki.stl
    • sliced/handguard.stl
    • sliced/pommel.stl
    • sliced/under_handguard.stl
    • sliced_n_with_rod_slot/blade_scratched_lower.stl
    • sliced_n_with_rod_slot/blade_scratched_upper.stl
    • sliced_n_with_rod_slot/blade_smooth_lower.stl
    • sliced_n_with_rod_slot/blade_smooth_upper.stl
    • sliced_n_with_rod_slot/grip_fabric_textured.stl
    • sliced_n_with_rod_slot/grip_smooth.stl
    • sliced_n_with_rod_slot/habaki.stl
    • sliced_n_with_rod_slot/handguard.stl
    • sliced_n_with_rod_slot/pommel.stl
    • sliced_n_with_rod_slot/under_handguard.stl
  • pommel.stl

Learn more about the formats
Publication date 2023-10-24 at 15:00
Design number 1534525
Random_but_Quality

Random_but_Quality

3D printer file info

3D model description

Making Videos:
Part 1: https://www.youtube.com/watch?v=PTdki-YUIAk&t=8s
Part 2: https://www.youtube.com/watch?v=C7QULAw2h8s

The dagger of Toji Fushiguro from Jujutsu Kaisen, “Inverted Spears of Heaven”. High resolution files, designed for 3D printing. Ideal for cosplaying and decorating. All details are real reliefs or engraves. It will slay your cosplay, it even slayed Gojo and his infinity :)

--Dimensions--
It has 53cm total length. 28cm for blade and 25cm for handguard + grip. Blade has 1cm thickness. There is a 45cm x 5mm diameter rod slot inside of the sword (optional).

--Assembling--

There is 4 version of the dagger. Since all parts are modular, you can make your own version of the sword.
2 versions of the blade part: One has smooth surface, the other one has scratched metal texture engraves
2 versions of the grip: One has smooth surfacei the other one has fabric texture engraved
All parts are sliced under 21cm so you can print them with any 3D printer.
There is a 5mm diameter x 45cm metal rod slot inside of the Dagger. It isn’t a must but if you put a metal rod inside of the dagger, it will be rock solid.
Don't forget to use a strong glue while assembling the parts
There is also printable chains inside of the files. If you want a stronger chain, use single chain pieces, print them and assemble them one by one. You can adjust the length of the chain

There is 0.6mm tolerance gap between sockets and plugs. İf you use a standart FDM 3D Printer with 0.4mm nozzle, it should be perfect fit. If it's a little loose, don’t worry. The main task of the plugs is to keep them stable and correctly oriented while you are pasting the parts.

--Recommended Printing Options--

I suggest that you have done tolerance and flow rate tests on your 3d printer before you start printing the model. I recommend minimum 3 walls and 40% or more infill rate for all parts, especially for blades. It is a thin and big print and it costs probably 300gr+ material in total for one single dagger so we don't want it to be fragile. If the plugs and sockets have difficulties or do not enter each other, you could adjust your flow rate or could choose " exclusive " on slicing tolerance option

If you have any questions or requests, feel free to message me. I'll gladly help as much as i can.

Don't forget to follow me on instagram! you could reach me on DM and follow my productions as well
@random_but_quality
https://www.instagram.com/random_but_quality

Also you can check my youtube channel! I upload short timelapse and long painting videos of my models
https://www.youtube.com/@randombutquality161/featured

3D printing settings

--Recommended Printing Options--

I suggest that you have done tolerance and flow rate tests on your 3d printer before you start printing the model. I recommend minimum 3 walls and 40% or more infill rate for all parts, especially for blades. It is a thin and big print and it costs probably 300gr+ material in total for one single dagger so we don't want it to be fragile. If the plugs and sockets have difficulties or do not enter each other, you could adjust your flow rate or could choose " exclusive " on slicing tolerance option

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.