Magnet Socket for 28 mm Citadel Base
263
views
22
downloads
0 comments
Loading comments... 
Magnet Socket for 28 mm Citadel Base
3D
Published 2023-10-24T13:35:03+00:00
7
0
Add to Collection
Description
I always had troubles gluing magnets to citadel bases, either the height of the base is weird, or there are these letters and digits on the inside that cause troubles, so I made this little socket.
It goes into the 28mm Citadel Base, and can be fitted with 5x2 mm magnet.
To glue it, place it a flat surface, add some glue, and place the base on top (be careful not to glue everything to the surface). Once dry, you can glue the magnet in.
The socket isn't high enough to touch the "roof" of the base, it's held in place by the base's walls. This way we can avoid the issue of letters and digits printed on the roof of the base.
License
Technical Information
| Date published | 24/10/2023 |
| Support Free | YES |
More Information
Object Parts
